[Sun May  5 12:16:37 2013] Detection parameters:
  Position = (366.3, 468.9) = 13 30 23.09 24 27 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.0 +/- 13.4
  Background counts = 33.8
  Rate = 0.002 +/- 0.0004

[Sun May  5 12:16:37 2013] Off-axis axis estimate = 13.30'
[Sun May  5 12:17:10 2013] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 13.08"
[Sun May  5 12:17:10 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Sun May  5 12:17:10 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 13.08"
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src63.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src63.csv
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src63.csv
[Sun May  5 12:17:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun May  5 12:17:14 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun May  5 12:17:14 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sun May  5 12:17:35 2013] Spatial fit model total counts = 311.186000, observed total counts = 290.000000
[Sun May  5 12:17:35 2013] Offset between fit and detection position for source 65 = 0.171335 pixels
[Sun May  5 12:17:35 2013] 308.021700 total counts/ 256.155000 bgd. counts: snr = 3.240688
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.171335 pixels
  Position = (366.3, 468.7) = 13 30 23.09 24 27 53.6
  Extent = 6.7 (4.7-9.6)", rotation angle = 0
  Source counts = 51.9 +/- 17.6
  Background counts = 256.2
  Rate = 0.002 +/- 0.0005
[Sun May  5 12:17:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:35 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:35 2013] Source does appear to be extended
[Sun May  5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:01 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 6.72"
[Sun May  5 12:18:01 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.956
[Sun May  5 12:18:01 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 6.72"
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src62.ximg exists
[Sun May  5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src62.csv
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src62_1.ximg exists
[Sun May  5 12:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src62.csv
[Sun May  5 12:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sun May  5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sun May  5 12:18:03 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sun May  5 12:18:20 2013] Spatial fit model total counts = 265.412000, observed total counts = 250.000000
[Sun May  5 12:18:20 2013] Offset between fit and detection position for source 65 = 0.186796 pixels
[Sun May  5 12:18:20 2013] 256.935700 total counts/ 205.910000 bgd. counts: snr = 3.555906
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.186796 pixels
  Position = (366.5, 468.7) = 13 30 23.03 24 27 53.7
  Extent = 6.7 (4.7-9.6)", rotation angle = 0
  Source counts = 51.0 +/- 16.0
  Background counts = 205.9
  Rate = 0.002 +/- 0.0005
[Sun May  5 12:18:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:20 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:20 2013] Source does appear to be extended
[Sun May  5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:45 2013] XMMSAS src. selection expression = ellipse(31839.017600, 40730.810600, 404.796612, 404.796612, 0.000000, X, Y)
[Sun May  5 12:18:45 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65_src.reg
[Sun May  5 12:18:45 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (343, 445) - (390, 492)
[Sun May  5 12:18:45 2013] XMMSAS bgd. selection expression = annulus(31839.017600, 40730.810600, 674.661019, 1349.322039, X, Y)
[Sun May  5 12:18:45 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65.gif
[Sun May  5 12:41:48 2013] Mean detx,y = (-11271.43, 13717.77) 
[Sun May  5 12:41:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 12:42:03 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 12:42:04 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sun May  5 12:42:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sun May  5 14:10:16 2013] Not generating rmf since there are only 51 counts
[Sun May  5 14:10:16 2013] rmf not generated due to insufficient counts
[Sun May  5 14:28:46 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:46 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65_src_b10.pi.gz = 105.00
[Sun May  5 14:28:46 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65_bgd.pi.gz = 342.00
[Sun May  5 14:28:46 2013] Got source and background scale factors 515200.000000, 2079428.000000
[Sun May  5 14:28:46 2013] User source parameters:
  Position = (366.5, 468.7) = 13 30 23.03 24 27 53.7
  Extent = 6.7 (4.7-9.6)", rotation angle = 0
  Source aperture counts = 20.3 +/- 11.3
  Background aperture counts = 84.7
  Rate = 0.0006 +/- 0.0003

[Sun May  5 14:28:51 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:51 2013] Using photon index=1.80, rate=0.00153, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65.arf
[Sun May  5 14:28:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:51 2013] Updating source flux to 1.5e-14
[Sun May  5 14:29:18 2013] Source 65 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete