[Sun May 5 12:16:36 2013] Detection parameters: Position = (270.6, 405.8) = 13 30 53.59 24 23 21.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 117.2 +/- 15.3 Background counts = 38.2 Rate = 0.003 +/- 0.0004 [Sun May 5 12:16:37 2013] Off-axis axis estimate = 8.04' [Sun May 5 12:17:10 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 10.45" [Sun May 5 12:17:10 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890 [Sun May 5 12:17:10 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 10.45" [Sun May 5 12:17:11 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src34.ximg exists [Sun May 5 12:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src34.csv [Sun May 5 12:17:11 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src34_1.ximg exists [Sun May 5 12:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src34.csv [Sun May 5 12:17:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:13 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Sun May 5 12:17:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src34.csv [Sun May 5 12:17:13 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Sun May 5 12:17:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src34.csv [Sun May 5 12:17:13 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:35 2013] Warning, spatial fit 34 centroid is now closest to src. 66 [Sun May 5 12:17:35 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:17:35 2013] Assessing source extent using major [Sun May 5 12:17:35 2013] Source does appear to be extended [Sun May 5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:17:35 2013] Source is confused with source 67 [Sun May 5 12:18:01 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 10.45" [Sun May 5 12:18:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.890 [Sun May 5 12:18:01 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 10.45" [Sun May 5 12:18:01 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src34.ximg exists [Sun May 5 12:18:01 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src34_1.ximg exists [Sun May 5 12:18:01 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src34 appears to have run properly [Sun May 5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists [Sun May 5 12:18:03 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists [Sun May 5 12:18:03 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly [Sun May 5 12:18:20 2013] Spatial fit model total counts = 348.120000, observed total counts = 327.000000 [Sun May 5 12:18:20 2013] Offset between fit and detection position for source 36 = 0.205838 pixels [Sun May 5 12:18:20 2013] 330.229400 total counts/ 252.973000 bgd. counts: snr = 4.857327 Spatial fit parameters: Offset between fit and detection position for source 36 = 0.205838 pixels Position = (270.7, 406.0) = 13 30 53.55 24 23 21.0 Extent = 5.2 (3.4-7.2)", rotation angle = 0 Source counts = 77.3 +/- 18.2 Background counts = 253.0 Rate = 0.002 +/- 0.0005 [Sun May 5 12:18:20 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:18:20 2013] Assessing source extent using major axis lower bound [Sun May 5 12:18:20 2013] Source does appear to be extended [Sun May 5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:18:45 2013] XMMSAS src. selection expression = ellipse(23502.389200, 35274.914800, 313.845009, 313.845009, 0.000000, X, Y) [Sun May 5 12:18:45 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36_src.reg [Sun May 5 12:18:45 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (253, 388) - (289, 424) [Sun May 5 12:18:45 2013] XMMSAS bgd. selection expression = annulus(23502.389200, 35274.914800, 523.075015, 1046.150030, X, Y) && !ellipse(21277.378600, 36697.178000, 1732.360050, 1732.360050, 0.000000, X, Y) && !ellipse(20872.166000, 37593.546000, 1602.272046, 1602.272046, 0.000000, X, Y) && !ellipse(24654.654960, 36221.431800, 631.247218, 442.328813, 220.394000, X, Y) && !ellipse(22119.434000, 33691.158000, 803.528023, 803.528023, 0.000000, X, Y) && !ellipse(22332.441200, 33267.689200, 1499.856043, 405.119212, 68.553600, X, Y) && !ellipse(23383.394000, 34479.668400, 1633.384047, 1633.384047, 0.000000, X, Y) [Sun May 5 12:18:45 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36.gif [Sun May 5 12:23:03 2013] Mean detx,y = (-1655.82, 11115.43) [Sun May 5 12:23:06 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 12:23:18 2013] Binned source spectrum to 10 counts/bin [Sun May 5 12:23:18 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36_src_b10.pi.gz [Sun May 5 12:23:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36_bgd.pi.gz [Sun May 5 13:36:04 2013] Not generating rmf since there are only 77 counts [Sun May 5 13:36:04 2013] rmf not generated due to insufficient counts [Sun May 5 14:28:41 2013] Updating aperture counts using extracted products [Sun May 5 14:28:41 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 120.00 [Sun May 5 14:28:41 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36_bgd.pi.gz = 15.00 [Sun May 5 14:28:41 2013] Got source and background scale factors 308800.000000, 154498.000000 [Sun May 5 14:28:41 2013] User source parameters: Position = (270.7, 406.0) = 13 30 53.55 24 23 21.0 Extent = 5.2 (3.4-7.2)", rotation angle = 0 Source aperture counts = 90.0 +/- 12.0 Background aperture counts = 30.0 Rate = 0.003 +/- 0.0004 [Sun May 5 14:28:50 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 14:28:50 2013] Using photon index=1.80, rate=0.00231, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36.arf [Sun May 5 14:28:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 14:28:50 2013] Updating source flux to 1.4e-14 [Sun May 5 14:29:18 2013] Flag c found in src. 36 procflags, skipping spectral fitting [Sun May 5 14:29:18 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting [Sun May 5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete