[Sun May  5 12:16:34 2013] Detection parameters:
  Position = (190.5, 409.2) = 13 31 19.09 24 23 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 20.3
  Background counts = 37.9
  Rate = 0.003 +/- 0.0006

[Sun May  5 12:16:37 2013] Off-axis axis estimate = 11.21'
[Sun May  5 12:17:10 2013] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 12:17:10 2013] Initial guess for spatial extent in simple fitting = 12.03"
[Sun May  5 12:17:10 2013] source mask rpix=2.8, npix_max = 42, mask sum = 24, frac = 0.562
[Sun May  5 12:17:10 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.03"
[Sun May  5 12:17:11 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src3.ximg exists
[Sun May  5 12:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src3.csv
[Sun May  5 12:17:11 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May  5 12:17:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src3.csv
[Sun May  5 12:17:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May  5 12:17:12 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May  5 12:17:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May  5 12:17:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:35 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.038073 pixels away
[Sun May  5 12:17:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:35 2013] Assessing source extent using major
[Sun May  5 12:17:35 2013] Source does appear to be extended
[Sun May  5 12:17:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:17:35 2013] Source is confused with source 50
[Sun May  5 12:18:01 2013] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 12:18:01 2013] Initial guess for spatial extent in simple fitting = 12.03"
[Sun May  5 12:18:01 2013] source mask rpix=2.8, npix_max = 42, mask sum = 24, frac = 0.562
[Sun May  5 12:18:01 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.03"
[Sun May  5 12:18:01 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src3.ximg exists
[Sun May  5 12:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src3.csv
[Sun May  5 12:18:01 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May  5 12:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src3.csv
[Sun May  5 12:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May  5 12:18:02 2013] fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May  5 12:18:02 2013] Fit fullrun_pn_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May  5 12:18:20 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Sun May  5 12:18:20 2013] Spatial fit model total counts = 1395.450000, observed total counts = 1136.000000
[Sun May  5 12:18:20 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:18:20 2013] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 20.191164 pixels away
[Sun May  5 12:18:20 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:20 2013] Assessing source extent using major
[Sun May  5 12:18:20 2013] Source does appear to be extended
[Sun May  5 12:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:44 2013] XMMSAS src. selection expression = ellipse(16525.053101, 35549.357544, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 12:18:44 2013] Not overwriting source region fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src.reg
[Sun May  5 12:18:44 2013] Extracting stamp from image fullrun_pn_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (153, 372) - (228, 447)
[Sun May  5 12:18:44 2013] XMMSAS bgd. selection expression = annulus(16525.053101, 35549.357544, 1087.500000, 2175.000000, X, Y) && !ellipse(19140.455000, 34920.111000, 528.793615, 528.793615, 0.000000, X, Y) && !ellipse(16151.878000, 34976.524000, 450.296813, 450.296813, 0.000000, X, Y) && !ellipse(15453.268000, 35011.292000, 1979.928057, 1979.928057, 0.000000, X, Y)
[Sun May  5 12:18:44 2013] Writing fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3.gif
[Sun May  5 12:18:46 2013] ../../xmm0100240201/products/events/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0100240201/products/events/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun May  5 12:18:46 2013] Mean detx,y = (5071.93, 13355.20) 
[Sun May  5 12:18:46 2013] ../../xmm0100240201/products/images/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0100240201/products/images/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun May  5 12:18:46 2013] ../../xmm0100240201/products/spectra/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun May  5 12:18:46 2013] Setting source spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May  5 12:18:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May  5 12:18:46 2013] ../../xmm0100240201/products/lightcurves/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun May  5 13:06:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 13:06:04 2013] rmf not generated due to insufficient counts
[Sun May  5 14:28:34 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:34 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 555.00
[Sun May  5 14:28:34 2013] Total counts from fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 296.00
[Sun May  5 14:28:34 2013] Got source and background scale factors 1010384.000000, 1364868.000000
[Sun May  5 14:28:34 2013] User source parameters:
  Position = (190.5, 409.2) = 13 31 19.09 24 23 35.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 335.9 +/- 24.6
  Background aperture counts = 219.1
  Rate = 0.01 +/- 0.0007

[Sun May  5 14:28:34 2013] Updating counts from extracted products
[Sun May  5 14:28:34 2013] Set source signif. to 335.88/14.80 = 22.69
[Sun May  5 14:28:50 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:50 2013] Using photon index=1.80, rate=0.01, arf fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3.arf
[Sun May  5 14:28:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:50 2013] Updating source flux to 1.7e-13
[Sun May  5 14:29:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:33 2013] xmm0100240201/analysis//spectral/fullrun_pn_xmm0100240201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete