[Sun May  5 12:16:40 2013] Detection parameters:
  Position = (409.2, 355.3) = 13 30 9.48 24 19 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.6 +/- 13.1
  Background counts = 18.1
  Rate = 0.002 +/- 0.0003

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 9.02'
[Sun May  5 12:17:16 2013] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 10.94"
[Sun May  5 12:17:16 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 10.94"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src23.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src23.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src23.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May  5 12:17:17 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May  5 12:17:45 2013] Spatial fit model total counts = 210.870000, observed total counts = 209.000000
[Sun May  5 12:17:45 2013] Offset between fit and detection position for source 9 = 0.308344 pixels
[Sun May  5 12:17:45 2013] 204.191100 total counts/ 143.724000 bgd. counts: snr = 5.043761
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.308344 pixels
  Position = (408.9, 355.5) = 13 30 9.55 24 19 41.1
  Extent = 5.4 (4.3-6.9)", rotation angle = 0
  Source counts = 60.5 +/- 14.3
  Background counts = 143.7
  Rate = 0.002 +/- 0.0004
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 5.43"
[Sun May  5 12:18:05 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.982
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 5.43"
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src22.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src22.csv
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src22.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun May  5 12:18:06 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun May  5 12:18:29 2013] Warning, spatial fit 22 centroid is now closest to src. 16
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:40 2013] XMMSAS src. selection expression = ellipse(35528.601900, 30883.087600, 325.726809, 325.726809, 0.000000, X, Y)
[Sun May  5 14:27:40 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src.reg
[Sun May  5 14:27:40 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (390, 337) - (428, 374)
[Sun May  5 14:27:40 2013] XMMSAS bgd. selection expression = annulus(35528.601900, 30883.087600, 542.878016, 1085.756031, X, Y) && !ellipse(34799.915200, 30502.464600, 351.323210, 351.323210, 0.000000, X, Y)
[Sun May  5 14:27:40 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9.gif
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun May  5 14:27:41 2013] Mean detx,y = (11854.06, -3449.76) 
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun May  5 14:27:41 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May  5 14:27:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] Not generating rmf since there are only 60 counts
[Sun May  5 14:27:45 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Sun May  5 14:29:02 2013] Updating aperture counts using extracted products
[Sun May  5 14:29:02 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 87.00
[Sun May  5 14:29:02 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 136.00
[Sun May  5 14:29:02 2013] Got source and background scale factors 330044.000000, 2355340.000000
[Sun May  5 14:29:02 2013] User source parameters:
  Position = (408.9, 355.5) = 13 30 9.55 24 19 41.1
  Extent = 5.4 (4.3-6.9)", rotation angle = 0
  Source aperture counts = 67.9 +/- 10.4
  Background aperture counts = 19.1
  Rate = 0.002 +/- 0.0003

[Sun May  5 14:29:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:05 2013] Using photon index=1.80, rate=0.00166, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9.arf
[Sun May  5 14:29:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:05 2013] Updating source flux to 4.8e-14
[Sun May  5 14:29:13 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete