[Sun May  5 12:16:40 2013] Detection parameters:
  Position = (389.8, 225.2) = 13 30 15.68 24 10 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.2 +/- 17.0
  Background counts = 18.7
  Rate = 0.005 +/- 0.0004

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 8.49'
[Sun May  5 12:17:16 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sun May  5 12:17:16 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.67"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src10.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src10.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src10.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May  5 12:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May  5 12:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May  5 12:17:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:45 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.476291 pixels away
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sun May  5 12:18:05 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.67"
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src10.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src10.csv
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src10.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May  5 12:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:29 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.615198 pixels away
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:40 2013] XMMSAS src. selection expression = ellipse(33862.643982, 19542.597443, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 14:27:40 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src.reg
[Sun May  5 14:27:40 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (352, 188) - (427, 263)
[Sun May  5 14:27:40 2013] XMMSAS bgd. selection expression = annulus(33862.643982, 19542.597443, 1087.500000, 2175.000000, X, Y) && !ellipse(33676.010400, 22119.214860, 457.516013, 286.107208, 316.795607, X, Y)
[Sun May  5 14:27:40 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7.gif
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun May  5 14:27:41 2013] Mean detx,y = (6835.78, 6856.14) 
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun May  5 14:27:41 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May  5 14:27:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 14:27:45 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Sun May  5 14:29:00 2013] Updating aperture counts using extracted products
[Sun May  5 14:29:00 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 214.00
[Sun May  5 14:29:00 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 427.00
[Sun May  5 14:29:00 2013] Got source and background scale factors 1019002.000000, 9800064.000000
[Sun May  5 14:29:00 2013] User source parameters:
  Position = (389.8, 225.2) = 13 30 15.68 24 10 14.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 169.6 +/- 15.7
  Background aperture counts = 44.4
  Rate = 0.005 +/- 0.0004

[Sun May  5 14:29:00 2013] Updating counts from extracted products
[Sun May  5 14:29:00 2013] Set source signif. to 169.60/6.66 = 25.45
[Sun May  5 14:29:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:05 2013] Using photon index=1.80, rate=0.00466, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7.arf
[Sun May  5 14:29:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:05 2013] Updating source flux to 9.8e-14
[Sun May  5 14:29:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete