[Sun May 5 12:16:40 2013] Detection parameters: Position = (270.4, 281.9) = 13 30 53.63 24 14 21.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 648.2 +/- 32.1 Background counts = 26.3 Rate = 0.02 +/- 0.0009 [Sun May 5 12:16:41 2013] Off-axis axis estimate = 2.36' [Sun May 5 12:17:16 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 7.61" [Sun May 5 12:17:16 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.989 [Sun May 5 12:17:16 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.61" [Sun May 5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src3.ximg exists [Sun May 5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src3.csv [Sun May 5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src3_1.ximg exists [Sun May 5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src3.csv [Sun May 5 12:17:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Sun May 5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Sun May 5 12:17:17 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Sun May 5 12:17:45 2013] Warning, spatial fit 3 centroid is now closest to src. 6 [Sun May 5 12:17:45 2013] Source 5 is offset by 2.315353 and -5.434583 pixels which is larger than 2 X fitted extent = 2.049531 x 2.049531, not incorporating fit results [Sun May 5 12:17:45 2013] Source 5 is offset by -0.744463 and -9.241594 pixels which is larger than 2 X fitted extent = 0.896901 x 0.896901, not incorporating fit results [Sun May 5 12:17:45 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:17:45 2013] Assessing source extent using major [Sun May 5 12:17:45 2013] Source does appear to be extended [Sun May 5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:17:45 2013] Source is confused with source 6 [Sun May 5 12:17:45 2013] Source is confused with source 30 [Sun May 5 12:18:05 2013] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 7.61" [Sun May 5 12:18:05 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.989 [Sun May 5 12:18:05 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.61" [Sun May 5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src3.ximg exists [Sun May 5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src3.csv [Sun May 5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src3_1.ximg exists [Sun May 5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src3.csv [Sun May 5 12:18:05 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Sun May 5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Sun May 5 12:18:06 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Sun May 5 12:18:29 2013] Spatial fit model total counts = 1147.020000, observed total counts = 1148.000000 [Sun May 5 12:18:29 2013] Offset between fit and detection position for source 5 = 1.643240 pixels [Sun May 5 12:18:29 2013] 1073.045000 total counts/ 383.682000 bgd. counts: snr = 35.193484 Spatial fit parameters: Offset between fit and detection position for source 5 = 1.643240 pixels Position = (272.0, 281.6) = 13 30 53.12 24 14 19.6 Extent = 9.3 (8.6-9.9)", rotation angle = 0 Source counts = 689.4 +/- 32.8 Background counts = 383.7 Rate = 0.02 +/- 0.0009 [Sun May 5 12:18:29 2013] Spatial fit model total counts = 1330.200000, observed total counts = 1279.000000 [Sun May 5 12:18:29 2013] Offset between fit and detection position for source 5 = 0.120803 pixels [Sun May 5 12:18:29 2013] Warning, changing simple spatial fit ID from 3 to 5 [Sun May 5 12:18:29 2013] 1354.351000 total counts/ 735.078000 bgd. counts: snr = 22.841017 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.120803 pixels Position = (271.9, 281.6) = 13 30 53.15 24 14 19.8 Extent = 10.5" x 4.8", rotation angle = 10 Source counts = 619.3 +/- 36.8 Background counts = 735.1 Rate = 0.02 +/- 0.001 [Sun May 5 12:18:29 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:18:29 2013] Assessing source extent using major [Sun May 5 12:18:29 2013] Source does appear to be extended [Sun May 5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 2.18 [Sun May 5 12:18:29 2013] Source is asymmetric [Sun May 5 14:27:39 2013] XMMSAS src. selection expression = ellipse(23608.844000, 24452.512400, 631.230018, 289.061408, 9.506880, X, Y) [Sun May 5 14:27:39 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src.reg [Sun May 5 14:27:39 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (236, 245) - (308, 318) [Sun May 5 14:27:39 2013] XMMSAS bgd. selection expression = annulus(23608.844000, 24452.512400, 1052.050030, 2104.100061, X, Y) && !ellipse(25329.170600, 24029.090800, 1312.944038, 1312.944038, 0.000000, X, Y) && !ellipse(23873.550262, 24404.505676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22912.188049, 24550.991608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.026960, 26803.751200, 498.679214, 498.679214, 0.000000, X, Y) && !ellipse(23328.052800, 26395.380200, 317.759209, 317.759209, 0.000000, X, Y) && !ellipse(25954.556915, 21730.330963, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 14:27:39 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5.gif [Sun May 5 14:27:40 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create [Sun May 5 14:27:40 2013] Mean detx,y = (-1426.41, -921.47) [Sun May 5 14:27:40 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create [Sun May 5 14:27:40 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create [Sun May 5 14:27:40 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Sun May 5 14:27:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.pi.gz [Sun May 5 14:27:40 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create [Sun May 5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create [Sun May 5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5.arf exists, delete to re-create [Sun May 5 14:28:59 2013] Updating aperture counts using extracted products [Sun May 5 14:28:59 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 806.00 [Sun May 5 14:28:59 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 809.00 [Sun May 5 14:28:59 2013] Got source and background scale factors 576000.000000, 6494780.000000 [Sun May 5 14:28:59 2013] User source parameters: Position = (271.9, 281.6) = 13 30 53.15 24 14 19.8 Extent = 10.5" x 4.8", rotation angle = 10 Source aperture counts = 734.3 +/- 29.4 Background aperture counts = 71.7 Rate = 0.02 +/- 0.0008 [Sun May 5 14:29:04 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 14:29:04 2013] Using photon index=1.80, rate=0.017, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5.arf [Sun May 5 14:29:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 14:29:04 2013] Updating source flux to 2.4e-13 [Sun May 5 14:29:13 2013] Flag b found in src. 5 procflags, skipping spectral fitting [Sun May 5 14:29:13 2013] Flag c found in src. 5 procflags, skipping spectral fitting [Sun May 5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete