[Sun May  5 12:16:40 2013] Detection parameters:
  Position = (364.2, 320.8) = 13 30 23.78 24 17 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.9 +/- 23.5
  Background counts = 21.5
  Rate = 0.01 +/- 0.0009

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 5.04'
[Sun May  5 12:17:16 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sun May  5 12:17:16 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.95"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src4.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src4.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src4.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May  5 12:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May  5 12:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May  5 12:17:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:45 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.674956 pixels away
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sun May  5 12:18:05 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.95"
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src4.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src4.csv
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src4.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May  5 12:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:29 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 19.875332 pixels away
[Sun May  5 12:18:29 2013] Spatial fit model total counts = 535.676000, observed total counts = 467.000000
[Sun May  5 12:18:29 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:39 2013] XMMSAS src. selection expression = ellipse(31640.480042, 27861.783936, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 14:27:39 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src.reg
[Sun May  5 14:27:39 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (327, 283) - (402, 358)
[Sun May  5 14:27:39 2013] XMMSAS bgd. selection expression = annulus(31640.480042, 27861.783936, 1087.500000, 2175.000000, X, Y) && !ellipse(30867.843600, 25693.010200, 391.940811, 391.940811, 0.000000, X, Y)
[Sun May  5 14:27:39 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4.gif
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun May  5 14:27:40 2013] Mean detx,y = (7258.74, -1795.30) 
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun May  5 14:27:40 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May  5 14:27:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 14:27:45 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Sun May  5 14:28:59 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:59 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 425.00
[Sun May  5 14:28:59 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 623.00
[Sun May  5 14:28:59 2013] Got source and background scale factors 1213660.000000, 10355508.000000
[Sun May  5 14:28:59 2013] User source parameters:
  Position = (364.2, 320.8) = 13 30 23.78 24 17 9.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 352.0 +/- 21.6
  Background aperture counts = 73.0
  Rate = 0.01 +/- 0.0006

[Sun May  5 14:28:59 2013] Updating counts from extracted products
[Sun May  5 14:28:59 2013] Set source signif. to 351.98/8.54 = 41.19
[Sun May  5 14:29:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:04 2013] Using photon index=1.80, rate=0.00968, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4.arf
[Sun May  5 14:29:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:04 2013] Updating source flux to 1.5e-13
[Sun May  5 14:29:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete