[Sun May  5 12:16:41 2013] Detection parameters:
  Position = (386.2, 253.9) = 13 30 16.83 24 12 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.8 +/- 10.3
  Background counts = 20.2
  Rate = 0.002 +/- 0.0005

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 7.13'
[Sun May  5 12:17:16 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Sun May  5 12:17:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.99"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src30.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src30.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src30.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun May  5 12:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun May  5 12:17:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun May  5 12:17:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:45 2013] Spatial fit model total counts = 128.142000, observed total counts = 115.000000
[Sun May  5 12:17:45 2013] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Sun May  5 12:18:05 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 9.99"
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src29.ximg exists
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May  5 12:18:06 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun May  5 12:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:29 2013] Spatial fit model total counts = 114.217000, observed total counts = 115.000000
[Sun May  5 12:18:29 2013] Offset between fit and detection position for source 35 = 1.718011 pixels
[Sun May  5 12:18:29 2013] 114.310300 total counts/ 74.591900 bgd. counts: snr = 4.598815
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.718011 pixels
  Position = (387.6, 254.8) = 13 30 16.36 24 12 23.0
  Extent = 5.7" x 3.6", rotation angle = 317
  Source counts = 39.7 +/- 10.7
  Background counts = 74.6
  Rate = 0.001 +/- 0.0003
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.60
[Sun May  5 12:18:29 2013] Source is asymmetric
[Sun May  5 14:27:40 2013] XMMSAS src. selection expression = ellipse(33676.010400, 22119.214860, 343.137010, 214.580406, 316.795607, X, Y)
[Sun May  5 14:27:40 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src.reg
[Sun May  5 14:27:40 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (368, 235) - (407, 275)
[Sun May  5 14:27:40 2013] XMMSAS bgd. selection expression = annulus(33676.010400, 22119.214860, 571.895016, 1143.790033, X, Y) && !ellipse(34754.819980, 22915.857000, 505.750415, 359.874410, 295.796000, X, Y)
[Sun May  5 14:27:40 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35.gif
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Sun May  5 14:27:41 2013] Mean detx,y = (7406.07, 4333.69) 
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Sun May  5 14:27:41 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun May  5 14:27:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] Not generating rmf since there are only 39 counts
[Sun May  5 14:27:45 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35.arf exists, delete to re-create
[Sun May  5 14:29:03 2013] Updating aperture counts using extracted products
[Sun May  5 14:29:03 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 29.00
[Sun May  5 14:29:03 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_bgd.pi.gz = 129.00
[Sun May  5 14:29:03 2013] Got source and background scale factors 233600.000000, 2485075.000000
[Sun May  5 14:29:03 2013] User source parameters:
  Position = (387.6, 254.8) = 13 30 16.36 24 12 23.0
  Extent = 5.7" x 3.6", rotation angle = 317
  Source aperture counts = 16.9 +/- 6.5
  Background aperture counts = 12.1
  Rate = 0.0005 +/- 0.0002

[Sun May  5 14:29:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:05 2013] Using photon index=1.80, rate=0.00109, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35.arf
[Sun May  5 14:29:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:05 2013] Updating source flux to 3e-14
[Sun May  5 14:29:13 2013] Flag p found in src. 35 procflags, skipping spectral fitting
[Sun May  5 14:29:13 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete