[Sun May  5 12:16:41 2013] Detection parameters:
  Position = (280.2, 308.4) = 13 30 50.52 24 16 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.2 +/- 13.3
  Background counts = 24.7
  Rate = 0.002 +/- 0.0004

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 1.51'
[Sun May  5 12:17:16 2013] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 7.18"
[Sun May  5 12:17:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.081
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.18"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src27.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src27.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src27.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May  5 12:17:17 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun May  5 12:17:45 2013] Spatial fit model total counts = 243.314000, observed total counts = 223.000000
[Sun May  5 12:17:45 2013] Offset between fit and detection position for source 28 = 0.198014 pixels
[Sun May  5 12:17:45 2013] 240.384000 total counts/ 194.942000 bgd. counts: snr = 3.254653
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.198014 pixels
  Position = (280.2, 308.6) = 13 30 50.53 24 16 17.4
  Extent = 6.2 (3.9-9.2)", rotation angle = 0
  Source counts = 45.4 +/- 15.5
  Background counts = 194.9
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 6.17"
[Sun May  5 12:18:05 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.088
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 6.17"
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src26.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src26.csv
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun May  5 12:18:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src26.csv
[Sun May  5 12:18:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun May  5 12:18:06 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun May  5 12:18:29 2013] Spatial fit model total counts = 243.234000, observed total counts = 223.000000
[Sun May  5 12:18:29 2013] Offset between fit and detection position for source 28 = 0.015897 pixels
[Sun May  5 12:18:29 2013] 240.470100 total counts/ 193.620000 bgd. counts: snr = 3.366940
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.015897 pixels
  Position = (280.2, 308.6) = 13 30 50.53 24 16 17.4
  Extent = 6.2 (3.9-9.3)", rotation angle = 0
  Source counts = 46.9 +/- 15.5
  Background counts = 193.6
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:40 2013] XMMSAS src. selection expression = ellipse(24326.026960, 26803.751200, 374.009411, 374.009411, 0.000000, X, Y)
[Sun May  5 14:27:40 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src.reg
[Sun May  5 14:27:40 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (259, 287) - (302, 330)
[Sun May  5 14:27:40 2013] XMMSAS bgd. selection expression = annulus(24326.026960, 26803.751200, 623.349018, 1246.698036, X, Y) && !ellipse(23328.052800, 26395.380200, 317.759209, 317.759209, 0.000000, X, Y)
[Sun May  5 14:27:40 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28.gif
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sun May  5 14:27:41 2013] Mean detx,y = (-51.80, -2952.92) 
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sun May  5 14:27:41 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun May  5 14:27:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] Not generating rmf since there are only 46 counts
[Sun May  5 14:27:45 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Sun May  5 14:29:02 2013] Updating aperture counts using extracted products
[Sun May  5 14:29:02 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 91.00
[Sun May  5 14:29:02 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.pi.gz = 285.00
[Sun May  5 14:29:02 2013] Got source and background scale factors 440000.000000, 3196344.000000
[Sun May  5 14:29:02 2013] User source parameters:
  Position = (280.2, 308.6) = 13 30 50.53 24 16 17.4
  Extent = 6.2 (3.9-9.3)", rotation angle = 0
  Source aperture counts = 51.8 +/- 10.6
  Background aperture counts = 39.2
  Rate = 0.001 +/- 0.0003

[Sun May  5 14:29:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:05 2013] Using photon index=1.80, rate=0.00129, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28.arf
[Sun May  5 14:29:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:05 2013] Updating source flux to 1.4e-14
[Sun May  5 14:29:13 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete