[Sun May  5 12:16:40 2013] Detection parameters:
  Position = (204.8, 316.8) = 13 31 14.51 24 16 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.1 +/- 13.0
  Background counts = 20.4
  Rate = 0.003 +/- 0.0005

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 6.92'
[Sun May  5 12:17:16 2013] Using EEF radius (= 9.89 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 9.89"
[Sun May  5 12:17:16 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.171
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.89"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src15.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src15.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src15.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun May  5 12:17:17 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun May  5 12:17:45 2013] Spatial fit model total counts = 163.962000, observed total counts = 165.000000
[Sun May  5 12:17:45 2013] Offset between fit and detection position for source 27 = 0.212285 pixels
[Sun May  5 12:17:45 2013] 164.833300 total counts/ 114.902000 bgd. counts: snr = 4.658103
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.212285 pixels
  Position = (204.8, 316.6) = 13 31 14.52 24 16 51.7
  Extent = 4.0 (2.9-5.9)", rotation angle = 0
  Source counts = 49.9 +/- 12.8
  Background counts = 114.9
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 3.96"
[Sun May  5 12:18:05 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.130
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 3.96"
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src15.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src15.csv
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src15.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May  5 12:18:06 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May  5 12:18:29 2013] Spatial fit model total counts = 159.862000, observed total counts = 158.000000
[Sun May  5 12:18:29 2013] Offset between fit and detection position for source 27 = 0.057407 pixels
[Sun May  5 12:18:29 2013] 159.794500 total counts/ 106.959000 bgd. counts: snr = 5.108779
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.057407 pixels
  Position = (204.8, 316.6) = 13 31 14.51 24 16 51.9
  Extent = 4.2 (3.0-6.4)", rotation angle = 0
  Source counts = 52.8 +/- 12.6
  Background counts = 107.0
  Rate = 0.001 +/- 0.0003
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:40 2013] XMMSAS src. selection expression = ellipse(17769.605720, 27497.739400, 254.247607, 254.247607, 0.000000, X, Y)
[Sun May  5 14:27:40 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src.reg
[Sun May  5 14:27:40 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (190, 302) - (219, 331)
[Sun May  5 14:27:40 2013] XMMSAS bgd. selection expression = annulus(17769.605720, 27497.739400, 423.746012, 847.492024, X, Y)
[Sun May  5 14:27:40 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27.gif
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun May  5 14:27:41 2013] Mean detx,y = (-6091.43, -5601.20) 
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun May  5 14:27:41 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May  5 14:27:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May  5 14:27:41 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] Not generating rmf since there are only 52 counts
[Sun May  5 14:27:45 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Sun May  5 14:29:01 2013] Updating aperture counts using extracted products
[Sun May  5 14:29:01 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 65.00
[Sun May  5 14:29:01 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 87.00
[Sun May  5 14:29:01 2013] Got source and background scale factors 208000.000000, 1594424.000000
[Sun May  5 14:29:01 2013] User source parameters:
  Position = (204.8, 316.6) = 13 31 14.51 24 16 51.9
  Extent = 4.2 (3.0-6.4)", rotation angle = 0
  Source aperture counts = 53.7 +/- 9.1
  Background aperture counts = 11.3
  Rate = 0.001 +/- 0.0003

[Sun May  5 14:29:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:05 2013] Using photon index=1.80, rate=0.00145, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27.arf
[Sun May  5 14:29:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:05 2013] Updating source flux to 2.9e-14
[Sun May  5 14:29:13 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete