[Sun May  5 12:16:40 2013] Detection parameters:
  Position = (146.8, 327.9) = 13 31 32.95 24 17 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.1 +/- 11.3
  Background counts = 18.6
  Rate = 0.003 +/- 0.0006

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 11.20'
[Sun May  5 12:17:16 2013] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 12.03"
[Sun May  5 12:17:16 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.844
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.03"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src16.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src16.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src16.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun May  5 12:17:17 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun May  5 12:17:45 2013] Spatial fit model total counts = 143.145000, observed total counts = 143.000000
[Sun May  5 12:17:45 2013] Offset between fit and detection position for source 24 = 0.026475 pixels
[Sun May  5 12:17:45 2013] 143.572900 total counts/ 114.214000 bgd. counts: snr = 2.747136
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.026475 pixels
  Position = (146.8, 327.9) = 13 31 32.96 24 17 40.6
  Extent = 3.0" x 3.0", rotation angle = 0
  Source counts = 29.4 +/- 12.0
  Background counts = 114.2
  Rate = 0.0008 +/- 0.0003
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:17:45 2013] Deleting source due to low Poisson probability 0.9