[Sun May  5 12:16:40 2013] Detection parameters:
  Position = (291.7, 276.9) = 13 30 46.87 24 13 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26587.7 +/- 191.2
  Background counts = 27.1
  Rate = 0.7 +/- 0.005

[Sun May  5 12:16:41 2013] Off-axis axis estimate = 1.64'
[Sun May  5 12:17:16 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:16 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Sun May  5 12:17:16 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sun May  5 12:17:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src1.csv
[Sun May  5 12:17:16 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  5 12:17:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src1.csv
[Sun May  5 12:17:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  5 12:17:17 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  5 12:17:17 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May  5 12:17:45 2013] Spatial fit model total counts = 23005.200000, observed total counts = 22278.000000
[Sun May  5 12:17:45 2013] Offset between fit and detection position for source 1 = 0.100271 pixels
[Sun May  5 12:17:45 2013] 22839.200000 total counts/ 5115.500000 bgd. counts: snr = 247.805160
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.100271 pixels
  Position = (291.7, 276.8) = 13 30 46.86 24 13 58.8
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 17723.7 +/- 151.1
  Background counts = 5115.5
  Rate = 0.5 +/- 0.004
[Sun May  5 12:17:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:45 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:45 2013] Source does appear to be extended
[Sun May  5 12:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:05 2013] Initial guess for spatial extent in simple fitting = 5.43"
[Sun May  5 12:18:05 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.981
[Sun May  5 12:18:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.43"
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src1.csv
[Sun May  5 12:18:05 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src1.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May  5 12:18:06 2013] fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May  5 12:18:06 2013] Fit fullrun_mos2_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May  5 12:18:29 2013] Spatial fit model total counts = 22821.700000, observed total counts = 22196.000000
[Sun May  5 12:18:29 2013] Offset between fit and detection position for source 1 = 0.023426 pixels
[Sun May  5 12:18:29 2013] 22892.700000 total counts/ 5114.200000 bgd. counts: snr = 248.602941
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023426 pixels
  Position = (291.7, 276.8) = 13 30 46.86 24 13 58.7
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 17778.5 +/- 151.3
  Background counts = 5114.2
  Rate = 0.5 +/- 0.004
[Sun May  5 12:18:29 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:29 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:29 2013] Source does appear to be extended
[Sun May  5 12:18:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:39 2013] Counts = 17778.500000, rescaling region sizes by 3.000000
[Sun May  5 14:27:39 2013] XMMSAS src. selection expression = ellipse(25329.170600, 24029.090800, 984.708028, 984.708028, 0.000000, X, Y)
[Sun May  5 14:27:39 2013] Not overwriting source region fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src.reg
[Sun May  5 14:27:39 2013] Extracting stamp from image fullrun_mos2_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (235, 220) - (348, 333)
[Sun May  5 14:27:39 2013] XMMSAS bgd. selection expression = annulus(25329.170600, 24029.090800, 4923.540142, 9847.080283, X, Y) && !ellipse(30867.843600, 25693.010200, 391.940811, 391.940811, 0.000000, X, Y) && !ellipse(23608.844000, 24452.512400, 841.640024, 385.415211, 9.506880, X, Y) && !ellipse(31640.480042, 27861.783936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.550262, 24404.505676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34754.819980, 22915.857000, 505.750415, 359.874410, 295.796000, X, Y) && !ellipse(16772.094800, 24161.181200, 412.788012, 412.788012, 0.000000, X, Y) && !ellipse(33862.643982, 19542.597443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26908.125080, 20894.143200, 405.752812, 405.752812, 0.000000, X, Y) && !ellipse(30774.978600, 32245.089000, 527.896015, 527.896015, 0.000000, X, Y) && !ellipse(15606.038120, 22879.080200, 539.321616, 539.321616, 0.000000, X, Y) && !ellipse(30996.983920, 23989.713000, 273.500808, 273.500808, 0.000000, X, Y) && !ellipse(17769.605720, 27497.739400, 338.996810, 338.996810, 0.000000, X, Y) && !ellipse(19999.875200, 23381.580000, 452.524013, 452.524013, 0.000000, X, Y) && !ellipse(17783.482559, 17825.714783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22912.188049, 24550.991608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24173.903600, 20300.391600, 316.379209, 316.379209, 0.000000, X, Y) && !ellipse(27705.671460, 13822.748400, 635.164018, 374.358411, 11.471342, X, Y) && !ellipse(35528.601900, 30883.087600, 434.302412, 434.302412, 0.000000, X, Y) && !ellipse(25445.089600, 30512.063400, 424.915212, 424.915212, 0.000000, X, Y) && !ellipse(34799.915200, 30502.464600, 351.323210, 351.323210, 0.000000, X, Y) && !ellipse(26806.579400, 29411.262400, 320.092009, 320.092009, 0.000000, X, Y) && !ellipse(24326.026960, 26803.751200, 498.679214, 498.679214, 0.000000, X, Y) && !ellipse(33158.405426, 34471.482025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33676.010400, 22119.214860, 457.516013, 286.107208, 316.795607, X, Y) && !ellipse(21959.334120, 27656.267600, 463.979213, 463.979213, 0.000000, X, Y) && !ellipse(26098.033800, 29475.133600, 308.523209, 308.523209, 0.000000, X, Y) && !ellipse(23328.052800, 26395.380200, 317.759209, 317.759209, 0.000000, X, Y) && !ellipse(25813.256256, 17764.015884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.257675, 34477.755859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25954.556915, 21730.330963, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 14:27:39 2013] Writing fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1.gif
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0100240201/products/events/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun May  5 14:27:40 2013] Mean detx,y = (69.14, -9.44) 
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0100240201/products/images/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun May  5 14:27:40 2013] Setting source spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May  5 14:27:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May  5 14:27:40 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Sun May  5 14:27:45 2013] fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Sun May  5 14:28:58 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:58 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 23065.00
[Sun May  5 14:28:59 2013] Total counts from fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 10553.00
[Sun May  5 14:28:59 2013] Got source and background scale factors 2813892.000000, 197808280.000000
[Sun May  5 14:28:59 2013] User source parameters:
  Position = (291.7, 276.8) = 13 30 46.86 24 13 58.7
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source aperture counts = 22914.9 +/- 152.9
  Background aperture counts = 150.1
  Rate = 0.6 +/- 0.004

[Sun May  5 14:29:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:29:04 2013] Using photon index=1.80, rate=0.489, arf fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1.arf
[Sun May  5 14:29:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:29:04 2013] Updating source flux to 5.1e-12
[Sun May  5 14:29:18 2013] xmm0100240201/analysis//spectral/fullrun_mos2_xmm0100240201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete