[Sun May  5 12:16:38 2013] Detection parameters:
  Position = (186.1, 402.0) = 13 31 20.50 24 23 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.5 +/- 24.1
  Background counts = 19.0
  Rate = 0.01 +/- 0.0006

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 11.08'
[Sun May  5 12:17:14 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Sun May  5 12:17:14 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.97"
[Sun May  5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src5.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src5.csv
[Sun May  5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src5.csv
[Sun May  5 12:17:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May  5 12:17:15 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 492.261000, observed total counts = 493.000000
[Sun May  5 12:17:40 2013] Offset between fit and detection position for source 5 = 0.180138 pixels
[Sun May  5 12:17:40 2013] 501.057000 total counts/ 278.116000 bgd. counts: snr = 13.368324
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.180138 pixels
  Position = (185.9, 401.9) = 13 31 20.55 24 23 3.0
  Extent = 5.6 (4.9-6.3)", rotation angle = 0
  Source counts = 222.9 +/- 22.4
  Background counts = 278.1
  Rate = 0.006 +/- 0.0006
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:17:40 2013] Source is confused with source 9
[Sun May  5 12:18:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 5.56"
[Sun May  5 12:18:03 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.265
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.56"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src5.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src5.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src5.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May  5 12:18:04 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun May  5 12:18:25 2013] Spatial fit model total counts = 473.934000, observed total counts = 476.000000
[Sun May  5 12:18:25 2013] Offset between fit and detection position for source 5 = 0.009506 pixels
[Sun May  5 12:18:25 2013] 480.984000 total counts/ 260.316000 bgd. counts: snr = 13.676940
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.009506 pixels
  Position = (185.9, 401.9) = 13 31 20.55 24 23 3.0
  Extent = 5.7 (4.9-6.2)", rotation angle = 0
  Source counts = 220.7 +/- 21.9
  Background counts = 260.3
  Rate = 0.006 +/- 0.0006
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:33 2013] XMMSAS src. selection expression = ellipse(16124.812960, 34920.328200, 339.748810, 339.748810, 0.000000, X, Y)
[Sun May  5 14:27:33 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src.reg
[Sun May  5 14:27:33 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (166, 382) - (205, 421)
[Sun May  5 14:27:33 2013] XMMSAS bgd. selection expression = annulus(16124.812960, 34920.328200, 566.248016, 1132.496033, X, Y) && !ellipse(16845.024000, 35877.830000, 1918.016055, 1918.016055, 0.000000, X, Y)
[Sun May  5 14:27:33 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5.gif
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun May  5 14:27:34 2013] Mean detx,y = (-12976.01, 5188.00) 
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun May  5 14:27:34 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May  5 14:27:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sun May  5 14:28:51 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:51 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 272.00
[Sun May  5 14:28:52 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 54.00
[Sun May  5 14:28:52 2013] Got source and background scale factors 364800.000000, 659200.000000
[Sun May  5 14:28:52 2013] User source parameters:
  Position = (185.9, 401.9) = 13 31 20.55 24 23 3.0
  Extent = 5.7 (4.9-6.2)", rotation angle = 0
  Source aperture counts = 242.1 +/- 17.5
  Background aperture counts = 29.9
  Rate = 0.007 +/- 0.0005

[Sun May  5 14:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:57 2013] Using photon index=1.80, rate=0.00608, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5.arf
[Sun May  5 14:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:57 2013] Updating source flux to 1.8e-13
[Sun May  5 14:29:08 2013] Flag c found in src. 5 procflags, skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete