[Sun May  5 12:16:39 2013] Detection parameters:
  Position = (348.4, 121.2) = 13 30 28.85 24 2 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.4 +/- 11.3
  Background counts = 18.3
  Rate = 0.001 +/- 0.0003

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 13.35'
[Sun May  5 12:17:14 2013] Using EEF radius (= 13.10 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 13.10"
[Sun May  5 12:17:14 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.993
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 13.10"
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src40.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src40.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src40_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src40.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sun May  5 12:17:15 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 155.999000, observed total counts = 156.000000
[Sun May  5 12:17:40 2013] Offset between fit and detection position for source 45 = 0.268187 pixels
[Sun May  5 12:17:40 2013] 155.401800 total counts/ 100.120000 bgd. counts: snr = 5.524866
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.268187 pixels
  Position = (348.7, 121.2) = 13 30 28.77 24 2 41.8
  Extent = 10.2 (6.0-14.7)", rotation angle = 0
  Source counts = 55.3 +/- 12.5
  Background counts = 100.1
  Rate = 0.002 +/- 0.0003
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 10.22"
[Sun May  5 12:18:03 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.108
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 10.22"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src37.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src37.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src37.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun May  5 12:18:05 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun May  5 12:18:25 2013] Warning, spatial fit 37 centroid is now closest to src. 24
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:34 2013] XMMSAS src. selection expression = ellipse(30285.979200, 10493.135800, 613.230018, 613.230018, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src.reg
[Sun May  5 14:27:34 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (313, 86) - (384, 156)
[Sun May  5 14:27:34 2013] XMMSAS bgd. selection expression = annulus(30285.979200, 10493.135800, 1022.050029, 2044.100059, X, Y)
[Sun May  5 14:27:34 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45.gif
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Sun May  5 14:27:35 2013] Mean detx,y = (14609.40, -802.41) 
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Sun May  5 14:27:35 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun May  5 14:27:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since there are only 55 counts
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Sun May  5 14:28:57 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:57 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 103.00
[Sun May  5 14:28:57 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_bgd.pi.gz = 440.00
[Sun May  5 14:28:57 2013] Got source and background scale factors 1185600.000000, 9750676.000000
[Sun May  5 14:28:57 2013] User source parameters:
  Position = (348.7, 121.2) = 13 30 28.77 24 2 41.8
  Extent = 10.2 (6.0-14.7)", rotation angle = 0
  Source aperture counts = 49.5 +/- 11.2
  Background aperture counts = 53.5
  Rate = 0.001 +/- 0.0003

[Sun May  5 14:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:58 2013] Using photon index=1.80, rate=0.00152, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45.arf
[Sun May  5 14:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:58 2013] Updating source flux to 3.9e-14
[Sun May  5 14:29:08 2013] Source 45 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete