[Sun May  5 12:16:39 2013] Detection parameters:
  Position = (327.8, 262.6) = 13 30 35.38 24 12 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 11.1
  Background counts = 25.0
  Rate = 0.001 +/- 0.0003

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 3.36'
[Sun May  5 12:17:14 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Sun May  5 12:17:14 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.119
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 8.11"
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src39.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src39.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src39.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:40 2013] Warning, spatial fit 39 centroid is now closest to src. 39
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 184.256000, observed total counts = 180.000000
[Sun May  5 12:17:40 2013] Offset between fit and detection position for source 40 = 1.224232 pixels
[Sun May  5 12:17:40 2013] Warning, changing simple spatial fit ID from 39 to 43
[Sun May  5 12:17:40 2013] 183.288300 total counts/ 171.985000 bgd. counts: snr = 0.861906
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.224232 pixels
  Position = (328.1, 263.8) = 13 30 35.28 24 13 2.4
  Extent = 3.1 (2.0-7.0)", rotation angle = 0
  Source counts = 11.3 +/- 13.5
  Background counts = 172.0
  Rate = 0.0003 +/- 0.0004
  Deleting source due to low Poisson probability