[Sun May  5 12:16:39 2013] Detection parameters:
  Position = (280.0, 308.3) = 13 30 50.57 24 16 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.5 +/- 13.6
  Background counts = 23.7
  Rate = 0.003 +/- 0.0004

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 1.51'
[Sun May  5 12:17:14 2013] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 7.18"
[Sun May  5 12:17:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.864
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.18"
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src21.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src21.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src21.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May  5 12:17:15 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 214.560000, observed total counts = 213.000000
[Sun May  5 12:17:40 2013] Offset between fit and detection position for source 33 = 0.173293 pixels
[Sun May  5 12:17:40 2013] 212.919400 total counts/ 164.266000 bgd. counts: snr = 3.796115
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.173293 pixels
  Position = (279.9, 308.4) = 13 30 50.62 24 16 16.3
  Extent = 3.8 (3.1-5.0)", rotation angle = 0
  Source counts = 48.7 +/- 14.6
  Background counts = 164.3
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 3.78"
[Sun May  5 12:18:03 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.801
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 3.78"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src21.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src21.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src21.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun May  5 12:18:05 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun May  5 12:18:25 2013] Spatial fit model total counts = 212.898000, observed total counts = 213.000000
[Sun May  5 12:18:25 2013] Offset between fit and detection position for source 33 = 0.018989 pixels
[Sun May  5 12:18:25 2013] 211.336800 total counts/ 163.375000 bgd. counts: snr = 3.752344
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.018989 pixels
  Position = (279.9, 308.4) = 13 30 50.62 24 16 16.2
  Extent = 3.8 (3.0-5.0)", rotation angle = 0
  Source counts = 48.0 +/- 14.5
  Background counts = 163.4
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:34 2013] XMMSAS src. selection expression = ellipse(24302.266140, 26779.573200, 230.190007, 230.190007, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src.reg
[Sun May  5 14:27:34 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (267, 295) - (293, 322)
[Sun May  5 14:27:34 2013] XMMSAS bgd. selection expression = annulus(24302.266140, 26779.573200, 383.650011, 767.300022, X, Y) && !ellipse(23366.560280, 26408.918000, 436.110413, 436.110413, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33.gif
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Sun May  5 14:27:35 2013] Mean detx,y = (-2732.47, -83.27) 
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Sun May  5 14:27:35 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun May  5 14:27:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since there are only 47 counts
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Sun May  5 14:28:54 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:54 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 60.00
[Sun May  5 14:28:54 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_bgd.pi.gz = 107.00
[Sun May  5 14:28:54 2013] Got source and background scale factors 161600.000000, 1311180.000000
[Sun May  5 14:28:54 2013] User source parameters:
  Position = (279.9, 308.4) = 13 30 50.62 24 16 16.2
  Extent = 3.8 (3.0-5.0)", rotation angle = 0
  Source aperture counts = 46.8 +/- 8.8
  Background aperture counts = 13.2
  Rate = 0.001 +/- 0.0002

[Sun May  5 14:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:58 2013] Using photon index=1.80, rate=0.00132, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33.arf
[Sun May  5 14:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:58 2013] Updating source flux to 1.9e-14
[Sun May  5 14:29:08 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete