[Sun May  5 12:16:38 2013] Detection parameters:
  Position = (364.3, 320.8) = 13 30 23.76 24 17 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 382.5 +/- 24.6
  Background counts = 23.0
  Rate = 0.02 +/- 0.001

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 5.04'
[Sun May  5 12:17:14 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sun May  5 12:17:14 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.95"
[Sun May  5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src4.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src4.csv
[Sun May  5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src4.csv
[Sun May  5 12:17:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:40 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.740303 pixels away
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sun May  5 12:18:03 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.95"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src4.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src4.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src4.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:25 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.278285 pixels away
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:33 2013] XMMSAS src. selection expression = ellipse(31647.603485, 27862.052094, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 14:27:33 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src.reg
[Sun May  5 14:27:33 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (327, 283) - (402, 358)
[Sun May  5 14:27:33 2013] XMMSAS bgd. selection expression = annulus(31647.603485, 27862.052094, 1087.500000, 2175.000000, X, Y) && !ellipse(30882.432007, 25702.199036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30793.000000, 28569.965210, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 14:27:33 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3.gif
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun May  5 14:27:34 2013] Mean detx,y = (-1521.98, -7421.48) 
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun May  5 14:27:34 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May  5 14:27:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Sun May  5 14:28:51 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:51 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 463.00
[Sun May  5 14:28:51 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 448.00
[Sun May  5 14:28:51 2013] Got source and background scale factors 1285488.000000, 8354751.000000
[Sun May  5 14:28:51 2013] User source parameters:
  Position = (364.3, 320.8) = 13 30 23.76 24 17 9.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 394.1 +/- 22.5
  Background aperture counts = 68.9
  Rate = 0.01 +/- 0.0006

[Sun May  5 14:28:51 2013] Updating counts from extracted products
[Sun May  5 14:28:51 2013] Set source signif. to 394.07/8.30 = 47.46
[Sun May  5 14:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:57 2013] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3.arf
[Sun May  5 14:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:57 2013] Updating source flux to 1.7e-13
[Sun May  5 14:29:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete