[Sun May  5 12:16:39 2013] Detection parameters:
  Position = (309.0, 338.9) = 13 30 41.36 24 18 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 12.4
  Background counts = 22.1
  Rate = 0.002 +/- 0.0004

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 3.03'
[Sun May  5 12:17:14 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sun May  5 12:17:14 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 7.94"
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src23.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src23.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src23.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May  5 12:17:15 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 204.632000, observed total counts = 204.000000
[Sun May  5 12:17:40 2013] Offset between fit and detection position for source 28 = 0.350584 pixels
[Sun May  5 12:17:40 2013] 179.075700 total counts/ 134.836000 bgd. counts: snr = 3.809862
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.350584 pixels
  Position = (308.6, 338.8) = 13 30 41.47 24 18 28.6
  Extent = 5.5 (3.6-8.2)", rotation angle = 0
  Source counts = 44.2 +/- 13.4
  Background counts = 134.8
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 5.51"
[Sun May  5 12:18:03 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.961
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 5.51"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src23.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src23.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src23.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May  5 12:18:05 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun May  5 12:18:25 2013] Spatial fit model total counts = 223.875000, observed total counts = 224.000000
[Sun May  5 12:18:25 2013] Offset between fit and detection position for source 28 = 0.055752 pixels
[Sun May  5 12:18:25 2013] 183.073100 total counts/ 141.799000 bgd. counts: snr = 3.466100
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.055752 pixels
  Position = (308.6, 338.8) = 13 30 41.48 24 18 28.4
  Extent = 5.2 (3.4-7.5)", rotation angle = 0
  Source counts = 41.3 +/- 13.5
  Background counts = 141.8
  Rate = 0.001 +/- 0.0004
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major axis lower bound
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:34 2013] XMMSAS src. selection expression = ellipse(26800.037600, 29424.500400, 310.714209, 310.714209, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src.reg
[Sun May  5 14:27:34 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (291, 321) - (326, 357)
[Sun May  5 14:27:34 2013] XMMSAS bgd. selection expression = annulus(26800.037600, 29424.500400, 517.857015, 1035.714030, X, Y) && !ellipse(26105.012200, 29465.772600, 431.563212, 431.563212, 0.000000, X, Y) && !ellipse(25445.179340, 30499.290800, 406.591212, 176.553605, 211.104468, X, Y)
[Sun May  5 14:27:34 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28.gif
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sun May  5 14:27:35 2013] Mean detx,y = (-4485.53, -3289.19) 
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sun May  5 14:27:35 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun May  5 14:27:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since there are only 41 counts
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Sun May  5 14:28:54 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:54 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 68.00
[Sun May  5 14:28:54 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_bgd.pi.gz = 118.00
[Sun May  5 14:28:54 2013] Got source and background scale factors 310400.000000, 2039372.000000
[Sun May  5 14:28:54 2013] User source parameters:
  Position = (308.6, 338.8) = 13 30 41.48 24 18 28.4
  Extent = 5.2 (3.4-7.5)", rotation angle = 0
  Source aperture counts = 50.0 +/- 9.3
  Background aperture counts = 18.0
  Rate = 0.001 +/- 0.0003

[Sun May  5 14:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:58 2013] Using photon index=1.80, rate=0.00114, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28.arf
[Sun May  5 14:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:58 2013] Updating source flux to 1.9e-14
[Sun May  5 14:29:08 2013] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete