[Sun May  5 12:16:39 2013] Detection parameters:
  Position = (293.4, 351.5) = 13 30 46.31 24 19 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.6 +/- 10.3
  Background counts = 21.5
  Rate = 0.002 +/- 0.0004

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 3.87'
[Sun May  5 12:17:14 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sun May  5 12:17:14 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.938
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.36"
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src33.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src33.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src33.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 133.771000, observed total counts = 120.000000
[Sun May  5 12:17:40 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sun May  5 12:18:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.938
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.36"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src33.ximg exists
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun May  5 12:18:04 2013] Fit fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src33 appears to have run properly
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:25 2013] Spatial fit model total counts = 124.571000, observed total counts = 120.000000
[Sun May  5 12:18:25 2013] Offset between fit and detection position for source 27 = 0.571851 pixels
[Sun May  5 12:18:25 2013] 126.661500 total counts/ 94.143200 bgd. counts: snr = 3.351455
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.571851 pixels
  Position = (293.0, 351.1) = 13 30 46.44 24 19 22.2
  Extent = 5.1" x 2.2", rotation angle = 211
  Source counts = 32.5 +/- 11.3
  Background counts = 94.1
  Rate = 0.0009 +/- 0.0003
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 2.30
[Sun May  5 12:18:25 2013] Source is asymmetric
[Sun May  5 14:27:34 2013] XMMSAS src. selection expression = ellipse(25445.179340, 30499.290800, 304.943409, 132.415204, 211.104468, X, Y)
[Sun May  5 14:27:34 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src.reg
[Sun May  5 14:27:34 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (276, 334) - (311, 369)
[Sun May  5 14:27:34 2013] XMMSAS bgd. selection expression = annulus(25445.179340, 30499.290800, 508.239015, 1016.478029, X, Y) && !ellipse(26800.037600, 29424.500400, 414.285612, 414.285612, 0.000000, X, Y) && !ellipse(26105.012200, 29465.772600, 431.563212, 431.563212, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27.gif
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun May  5 14:27:35 2013] Mean detx,y = (-5933.06, -2323.00) 
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun May  5 14:27:35 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun May  5 14:27:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since there are only 32 counts
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Sun May  5 14:28:56 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:56 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 33.00
[Sun May  5 14:28:56 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_bgd.pi.gz = 98.00
[Sun May  5 14:28:56 2013] Got source and background scale factors 124800.000000, 1991922.000000
[Sun May  5 14:28:56 2013] User source parameters:
  Position = (293.0, 351.1) = 13 30 46.44 24 19 22.2
  Extent = 5.1" x 2.2", rotation angle = 211
  Source aperture counts = 26.9 +/- 6.8
  Background aperture counts = 6.1
  Rate = 0.0007 +/- 0.0002

[Sun May  5 14:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:58 2013] Using photon index=1.80, rate=0.000895, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27.arf
[Sun May  5 14:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:58 2013] Updating source flux to 2.3e-14
[Sun May  5 14:29:08 2013] Flag p found in src. 27 procflags, skipping spectral fitting
[Sun May  5 14:29:08 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete