[Sun May  5 12:16:39 2013] Detection parameters:
  Position = (388.8, 224.3) = 13 30 15.99 24 10 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.1 +/- 12.2
  Background counts = 21.0
  Rate = 0.002 +/- 0.0003

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 8.47'
[Sun May  5 12:17:14 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sun May  5 12:17:14 2013] source mask rpix=2.5, npix_max = 34, mask sum = 19, frac = 0.545
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.67"
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src29.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src29.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src29.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:40 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.425621 pixels away
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sun May  5 12:18:03 2013] source mask rpix=2.5, npix_max = 34, mask sum = 19, frac = 0.545
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.67"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src29.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src29.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src29.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun May  5 12:18:05 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May  5 12:18:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sun May  5 12:18:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:25 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.181494 pixels away
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:34 2013] XMMSAS src. selection expression = ellipse(33778.354767, 19467.306122, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src.reg
[Sun May  5 14:27:34 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (351, 187) - (426, 262)
[Sun May  5 14:27:34 2013] XMMSAS bgd. selection expression = annulus(33778.354767, 19467.306122, 1087.500000, 2175.000000, X, Y) && !ellipse(33515.650238, 22055.115387, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 14:27:34 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25.gif
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sun May  5 14:27:35 2013] Mean detx,y = (7111.94, -6832.44) 
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sun May  5 14:27:35 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun May  5 14:27:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun May  5 14:27:35 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since there are only 77 counts
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Sun May  5 14:28:55 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:55 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 128.00
[Sun May  5 14:28:55 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_bgd.pi.gz = 533.00
[Sun May  5 14:28:56 2013] Got source and background scale factors 958522.000000, 9871004.000000
[Sun May  5 14:28:56 2013] User source parameters:
  Position = (388.8, 224.3) = 13 30 15.99 24 10 12.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 76.2 +/- 12.3
  Background aperture counts = 51.8
  Rate = 0.002 +/- 0.0003

[Sun May  5 14:28:56 2013] Updating counts from extracted products
[Sun May  5 14:28:56 2013] Set source signif. to 76.24/7.19 = 10.60
[Sun May  5 14:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:58 2013] Using photon index=1.80, rate=0.0021, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25.arf
[Sun May  5 14:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:58 2013] Updating source flux to 3.9e-13
[Sun May  5 14:29:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete