[Sun May  5 12:16:38 2013] Detection parameters:
  Position = (309.9, 241.7) = 13 30 41.08 24 11 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 18.0
  Background counts = 25.1
  Rate = 0.006 +/- 0.0006

[Sun May  5 12:16:39 2013] Off-axis axis estimate = 4.20'
[Sun May  5 12:17:14 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Sun May  5 12:17:14 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.826
[Sun May  5 12:17:14 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.53"
[Sun May  5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src7.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src7.csv
[Sun May  5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May  5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src7.csv
[Sun May  5 12:17:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May  5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May  5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May  5 12:17:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:17:40 2013] Spatial fit model total counts = 269.203000, observed total counts = 241.000000
[Sun May  5 12:17:40 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:17:40 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:17:40 2013] Assessing source extent using major
[Sun May  5 12:17:40 2013] Source does appear to be extended
[Sun May  5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:18:03 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Sun May  5 12:18:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.826
[Sun May  5 12:18:03 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.53"
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src7.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src7.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src7.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May  5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May  5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May  5 12:18:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 12:18:25 2013] Spatial fit model total counts = 269.314000, observed total counts = 241.000000
[Sun May  5 12:18:25 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 12:18:25 2013] Vigneting correction estimate = 1.000000
[Sun May  5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 12:18:25 2013] Assessing source extent using major
[Sun May  5 12:18:25 2013] Source does appear to be extended
[Sun May  5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:27:33 2013] XMMSAS src. selection expression = ellipse(26912.098541, 20975.241959, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 14:27:33 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src.reg
[Sun May  5 14:27:33 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (272, 204) - (347, 279)
[Sun May  5 14:27:33 2013] XMMSAS bgd. selection expression = annulus(26912.098541, 20975.241959, 1087.500000, 2175.000000, X, Y) && !ellipse(25327.136000, 24025.298800, 1358.925639, 1358.925639, 0.000000, X, Y) && !ellipse(24292.166000, 24247.708000, 1197.704034, 1197.704034, 0.000000, X, Y) && !ellipse(28879.732788, 23130.641205, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May  5 14:27:33 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23.gif
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sun May  5 14:27:34 2013] Mean detx,y = (3629.99, -782.27) 
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sun May  5 14:27:34 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun May  5 14:27:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun May  5 14:27:34 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sun May  5 14:27:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 14:27:39 2013] rmf not generated due to insufficient counts
[Sun May  5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Sun May  5 14:28:52 2013] Updating aperture counts using extracted products
[Sun May  5 14:28:52 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 192.00
[Sun May  5 14:28:52 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 794.00
[Sun May  5 14:28:52 2013] Got source and background scale factors 1223000.000000, 10442084.000000
[Sun May  5 14:28:52 2013] User source parameters:
  Position = (309.9, 241.7) = 13 30 41.08 24 11 22.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 99.0 +/- 14.9
  Background aperture counts = 93.0
  Rate = 0.003 +/- 0.0004

[Sun May  5 14:28:52 2013] Updating counts from extracted products
[Sun May  5 14:28:52 2013] Set source signif. to 99.00/9.64 = 10.27
[Sun May  5 14:28:58 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 14:28:58 2013] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23.arf
[Sun May  5 14:28:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 14:28:58 2013] Updating source flux to 3.1e-14
[Sun May  5 14:29:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete