[Sun May 5 12:16:38 2013] Detection parameters: Position = (355.5, 296.0) = 13 30 26.56 24 15 22.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 776.1 +/- 34.0 Background counts = 23.4 Rate = 0.03 +/- 0.001 [Sun May 5 12:16:39 2013] Off-axis axis estimate = 4.14' [Sun May 5 12:17:14 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:17:14 2013] Initial guess for spatial extent in simple fitting = 8.50" [Sun May 5 12:17:14 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830 [Sun May 5 12:17:14 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.50" [Sun May 5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src2.ximg exists [Sun May 5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src2.csv [Sun May 5 12:17:14 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src2_1.ximg exists [Sun May 5 12:17:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src2.csv [Sun May 5 12:17:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sun May 5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sun May 5 12:17:15 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sun May 5 12:17:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sun May 5 12:17:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:17:40 2013] Source 2 is offset by -7.288161 and 6.801161 pixels which is larger than 2 X fitted extent = 0.977016 x 0.977016, not incorporating fit results [Sun May 5 12:17:40 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:17:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:17:40 2013] Assessing source extent using major [Sun May 5 12:17:40 2013] Source does appear to be extended [Sun May 5 12:17:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 12:18:03 2013] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting [Sun May 5 12:18:03 2013] Initial guess for spatial extent in simple fitting = 8.50" [Sun May 5 12:18:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.830 [Sun May 5 12:18:03 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.50" [Sun May 5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src2.ximg exists [Sun May 5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src2.csv [Sun May 5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src2_1.ximg exists [Sun May 5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src2.csv [Sun May 5 12:18:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sun May 5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src2.csv [Sun May 5 12:18:04 2013] fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sun May 5 12:18:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src2.csv [Sun May 5 12:18:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0100240201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 12:18:25 2013] Source 2 is offset by -7.288161 and 6.801161 pixels which is larger than 2 X fitted extent = 0.977016 x 0.977016, not incorporating fit results [Sun May 5 12:18:25 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 22.851452 pixels away [Sun May 5 12:18:25 2013] Vigneting correction estimate = 1.000000 [Sun May 5 12:18:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 12:18:25 2013] Assessing source extent using major [Sun May 5 12:18:25 2013] Source does appear to be extended [Sun May 5 12:18:25 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 14:27:33 2013] XMMSAS src. selection expression = ellipse(30882.432007, 25702.199036, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 14:27:33 2013] Not overwriting source region fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src.reg [Sun May 5 14:27:33 2013] Extracting stamp from image fullrun_mos1_xmm0100240201_pi300-10000_cl_sm2.00.img.gz, (318, 258) - (393, 333) [Sun May 5 14:27:33 2013] XMMSAS bgd. selection expression = annulus(30882.432007, 25702.199036, 1087.500000, 2175.000000, X, Y) && !ellipse(31647.603485, 27862.052094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31011.831590, 23964.404026, 291.582408, 291.582408, 0.000000, X, Y) && !ellipse(30793.000000, 28569.965210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28879.732788, 23130.641205, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 14:27:33 2013] Writing fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2.gif [Sun May 5 14:27:34 2013] ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0100240201/products/events/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create [Sun May 5 14:27:34 2013] Mean detx,y = (327.67, -6006.92) [Sun May 5 14:27:34 2013] ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0100240201/products/images/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create [Sun May 5 14:27:34 2013] ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0100240201/products/spectra/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create [Sun May 5 14:27:34 2013] Setting source spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sun May 5 14:27:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sun May 5 14:27:34 2013] ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0100240201/products/lightcurves/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create [Sun May 5 14:27:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 14:27:39 2013] rmf not generated due to insufficient counts [Sun May 5 14:27:39 2013] fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create [Sun May 5 14:28:51 2013] Updating aperture counts using extracted products [Sun May 5 14:28:51 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 739.00 [Sun May 5 14:28:51 2013] Total counts from fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 546.00 [Sun May 5 14:28:51 2013] Got source and background scale factors 1284002.000000, 9012958.000000 [Sun May 5 14:28:51 2013] User source parameters: Position = (355.5, 296.0) = 13 30 26.56 24 15 22.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 661.2 +/- 28.2 Background aperture counts = 77.8 Rate = 0.02 +/- 0.0008 [Sun May 5 14:28:51 2013] Updating counts from extracted products [Sun May 5 14:28:51 2013] Set source signif. to 661.22/8.82 = 74.97 [Sun May 5 14:28:57 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 14:28:57 2013] Using photon index=1.80, rate=0.0182, arf fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2.arf [Sun May 5 14:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 14:28:57 2013] Updating source flux to 2.5e-13 [Sun May 5 14:29:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 14:29:13 2013] xmm0100240201/analysis//spectral/fullrun_mos1_xmm0100240201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete