[Fri Jun 15 11:38:21 2012] Detection parameters:
  Position = (358.6, 284.2) = 13 30 26.08 24 14 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 14.1
  Background counts = 49.9
  Rate = 0.004 +/- 0.0008

[Fri Jun 15 11:38:21 2012] Off-axis axis estimate = 4.48'
[Fri Jun 15 11:41:32 2012] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:41:32 2012] Initial guess for spatial extent in simple fitting = 8.67"
[Fri Jun 15 11:41:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Fri Jun 15 11:41:32 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.67"
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src68.ximg exists
[Fri Jun 15 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src68.csv
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src68_1.ximg exists
[Fri Jun 15 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src68.csv
[Fri Jun 15 14:30:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:30:16 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Fri Jun 15 14:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Fri Jun 15 14:30:16 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Fri Jun 15 14:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Fri Jun 15 14:30:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:01:03 2012] Source 68 is offset by -5.865202 and -4.912562 pixels which is larger than
2 X fitted extent = 0.925002 x 0.925002, not incorporating fit results
[Fri Jun 15 17:01:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:03 2012] Assessing source extent using major
[Fri Jun 15 17:01:03 2012] Source does appear to be extended
[Fri Jun 15 17:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:03 2012] Deleting source due to low Poisson probability 0.9