[Fri Jun 15 11:38:20 2012] Detection parameters:
  Position = (273.3, 324.0) = 13 30 53.20 24 17 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.4 +/- 22.8
  Background counts = 53.6
  Rate = 0.01 +/- 0.001

[Fri Jun 15 11:38:21 2012] Off-axis axis estimate = 2.60'
[Fri Jun 15 11:41:32 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:41:32 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Jun 15 11:41:32 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Fri Jun 15 11:41:32 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 7.73"
[Fri Jun 15 14:30:14 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src58.ximg exists
[Fri Jun 15 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src58.csv
[Fri Jun 15 14:30:14 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri Jun 15 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src58.csv
[Fri Jun 15 14:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:30:16 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri Jun 15 14:30:16 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Jun 15 14:30:16 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Fri Jun 15 17:01:03 2012] Spatial fit model total counts = 1301.710000, observed total counts = 1306.000000
[Fri Jun 15 17:01:03 2012] Offset between fit and detection position for source 58 = 1.791895 pixels
[Fri Jun 15 17:01:03 2012] Warning, changing simple spatial fit ID from 58 to 31
[Fri Jun 15 17:01:03 2012] 1156.750000 total counts/ 597.360000 bgd. counts: snr = 22.887409
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 1.791895 pixels
  Position = (272.2, 325.4) = 13 30 53.54 24 17 31.6
  Extent = 14.9 (14.4-15.2)", rotation angle = 0
  Source counts = 559.4 +/- 34.0
  Background counts = 597.4
  Rate = 0.02 +/- 0.001
[Fri Jun 15 17:01:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:03 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:03 2012] Source does appear to be extended
[Fri Jun 15 17:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:03 2012] Source is confused with source 31
[Fri Jun 15 17:01:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:01:31 2012] Initial guess for spatial extent in simple fitting = 14.90"
[Fri Jun 15 17:01:31 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.039
[Fri Jun 15 17:01:31 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 14.90"
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src52.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src52.csv
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src52.csv
[Fri Jun 15 19:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri Jun 15 19:00:10 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Jun 15 21:03:24 2012] Spatial fit model total counts = 1257.610000, observed total counts = 1246.000000
[Fri Jun 15 21:03:24 2012] Offset between fit and detection position for source 58 = 2.088754 pixels
[Fri Jun 15 21:03:24 2012] Warning, changing simple spatial fit ID from 52 to 29
[Fri Jun 15 21:03:24 2012] 1263.622000 total counts/ 834.441000 bgd. counts: snr = 14.857395
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 2.088754 pixels
  Position = (271.6, 327.4) = 13 30 53.74 24 17 40.2
  Extent = 15.2" x 4.8", rotation angle = 247
  Source counts = 429.2 +/- 35.5
  Background counts = 834.4
  Rate = 0.02 +/- 0.001
[Fri Jun 15 21:03:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:24 2012] Assessing source extent using major
[Fri Jun 15 21:03:24 2012] Source does appear to be extended
[Fri Jun 15 21:03:24 2012] Computing asymmetry using major and minor axis, asym = 3.13
[Fri Jun 15 21:03:24 2012] Source is asymmetric
[Fri Jun 15 21:03:50 2012] XMMSAS src. selection expression = ellipse(23580.570600, 28436.136000, 910.002026, 290.842208, 247.485000, X, Y)
[Fri Jun 15 21:03:50 2012] Writing source region out to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src58_src.reg
[Fri Jun 15 21:03:50 2012] Extracting stamp from image fullrun_pn_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (219, 275) - (324, 380)
[Fri Jun 15 21:03:50 2012] XMMSAS bgd. selection expression = annulus(23580.570600, 28436.136000, 1516.670044, 3033.340087, X, Y) && !ellipse(25444.093890, 23982.541600, 1438.356041, 1438.356041, 0.000000, X, Y) && !ellipse(21906.318000, 32536.366000, 1318.584038, 1318.584038, 0.000000, X, Y) && !ellipse(22187.352000, 31697.964000, 1446.072042, 1446.072042, 0.000000, X, Y) && !ellipse(22457.747925, 31182.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.666000, 29182.584000, 1002.400029, 1002.400029, 0.000000, X, Y) && !ellipse(23555.109200, 28525.440000, 1266.776036, 382.238411, 66.834000, X, Y) && !ellipse(23823.363000, 27850.999200, 1213.336035, 339.792010, 248.327000, X, Y) && !ellipse(24339.150000, 26626.150000, 1118.016032, 1118.016032, 0.000000, X, Y) && !ellipse(25582.295258, 30510.180969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22849.438000, 30099.670000, 1255.664036, 1255.664036, 0.000000, X, Y) && !ellipse(23080.272644, 29624.234863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.926636, 29437.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26976.727264, 29360.733826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.472687, 27616.350372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23447.627808, 26339.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.862600, 25579.490000, 1118.016032, 1118.016032, 0.000000, X, Y)
[Fri Jun 15 21:03:50 2012] Writing fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src58.gif
[Fri Jun 15 21:42:53 2012] Mean detx,y = (147.91, 4684.06) 
[Fri Jun 15 21:42:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:43:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:43:17 2012] Setting source spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Fri Jun 15 21:43:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sat Jun 16 00:28:15 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:15 2012] Error reading totcts from fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sat Jun 16 00:28:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:16 2012] Using photon index=1.80, rate=0.0157, arf fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src58.arf
[Sat Jun 16 00:28:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:16 2012] Updating source flux to 6.1e-14
[Sat Jun 16 00:29:34 2012] Flag c found in src. 58 procflags, skipping spectral fitting