[Fri Jun 15 11:38:19 2012] Detection parameters:
  Position = (356.8, 295.8) = 13 30 26.64 24 15 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2263.9 +/- 56.3
  Background counts = 51.3
  Rate = 0.1 +/- 0.003

[Fri Jun 15 11:38:21 2012] Off-axis axis estimate = 4.23'
[Fri Jun 15 11:41:32 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:41:32 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Fri Jun 15 11:41:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.947
[Fri Jun 15 11:41:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.55"
[Fri Jun 15 14:30:13 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 14:30:13 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 14:30:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:01:03 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.802929 pixels away
[Fri Jun 15 17:01:03 2012] Spatial fit model total counts = -1260.830000, observed total counts = 620.000000
[Fri Jun 15 17:01:03 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 17:01:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:03 2012] Assessing source extent using major
[Fri Jun 15 17:01:03 2012] Source does appear to be extended
[Fri Jun 15 17:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:31 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:01:31 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Fri Jun 15 17:01:31 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.947
[Fri Jun 15 17:01:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.55"
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 19:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 19:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 19:00:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 19:00:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:24 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.195671 pixels away
[Fri Jun 15 21:03:24 2012] Source 3 is offset by 6.381036 and -5.583960 pixels which is larger than
2 X fitted extent = 0.925002 x 0.925002, not incorporating fit results
[Fri Jun 15 21:03:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:24 2012] Assessing source extent using major
[Fri Jun 15 21:03:24 2012] Source does appear to be extended
[Fri Jun 15 21:03:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:03:49 2012] Counts = 2263.927979, rescaling region sizes by 2.000000
[Fri Jun 15 21:03:49 2012] XMMSAS src. selection expression = ellipse(30991.450165, 25687.495483, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing source region out to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 15 21:03:49 2012] Extracting stamp from image fullrun_pn_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (282, 221) - (432, 371)
[Fri Jun 15 21:03:49 2012] XMMSAS bgd. selection expression = annulus(30991.450165, 25687.495483, 4350.000000, 8700.000000, X, Y) && !ellipse(25444.093890, 23982.541600, 1438.356041, 1438.356041, 0.000000, X, Y) && !ellipse(23593.046200, 24424.103120, 485.957614, 485.957614, 0.000000, X, Y) && !ellipse(31740.760800, 27795.550000, 432.739212, 432.739212, 0.000000, X, Y) && !ellipse(33920.515656, 19400.583908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30551.031250, 34735.476898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33250.783000, 34500.273000, 417.989525, 417.989525, 0.000000, X, Y) && !ellipse(21248.998000, 34128.672000, 1416.968041, 1416.968041, 0.000000, X, Y) && !ellipse(21729.657913, 32924.728333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.318000, 32536.366000, 1318.584038, 1318.584038, 0.000000, X, Y) && !ellipse(30888.886383, 32201.068237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22187.352000, 31697.964000, 1446.072042, 1446.072042, 0.000000, X, Y) && !ellipse(22457.747925, 31182.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35708.786743, 30774.467896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34938.759216, 30480.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.666000, 29182.584000, 1002.400029, 1002.400029, 0.000000, X, Y) && !ellipse(30911.254800, 28647.954100, 358.719210, 358.719210, 0.000000, X, Y) && !ellipse(23555.109200, 28525.440000, 1266.776036, 382.238411, 66.834000, X, Y) && !ellipse(23823.363000, 27850.999200, 1213.336035, 339.792010, 248.327000, X, Y) && !ellipse(24339.150000, 26626.150000, 1118.016032, 1118.016032, 0.000000, X, Y) && !ellipse(31123.755585, 23970.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.774109, 22855.330597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27025.537323, 20861.584137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23499.353088, 35243.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.295258, 30510.180969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22849.438000, 30099.670000, 1255.664036, 1255.664036, 0.000000, X, Y) && !ellipse(23080.272644, 29624.234863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.926636, 29437.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26976.727264, 29360.733826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38921.308472, 29104.658905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23580.570600, 28436.136000, 1213.336035, 387.789611, 247.485000, X, Y) && !ellipse(28751.861267, 27692.908142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.472687, 27616.350372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23447.627808, 26339.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.862600, 25579.490000, 1118.016032, 1118.016032, 0.000000, X, Y) && !ellipse(29770.726105, 25431.763062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33638.753326, 21971.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22746.097382, 21336.299393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24285.416992, 20249.756531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.005371, 18619.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23281.385803, 17183.927826, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src3.gif
[Fri Jun 15 21:09:52 2012] Mean detx,y = (-5593.97, -675.53) 
[Fri Jun 15 21:09:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:12:02 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:12:03 2012] Setting source spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 15 21:12:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 15 22:21:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 22:21:09 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:14 2012] Error reading totcts from fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 16 00:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:15 2012] Using photon index=1.80, rate=0.13, arf fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src3.arf
[Sat Jun 16 00:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:15 2012] Updating source flux to 4.7e-13
[Sat Jun 16 00:29:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting