[Fri Jun 15 11:38:20 2012] Detection parameters:
  Position = (250.3, 379.0) = 13 31 0.51 24 21 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.8 +/- 23.0
  Background counts = 46.6
  Rate = 0.02 +/- 0.002

[Fri Jun 15 11:38:21 2012] Off-axis axis estimate = 6.80'
[Fri Jun 15 11:41:32 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:41:32 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Fri Jun 15 11:41:32 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Fri Jun 15 11:41:32 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.83"
[Fri Jun 15 14:30:14 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jun 15 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 15 14:30:14 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jun 15 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src20.csv
[Fri Jun 15 14:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jun 15 14:30:15 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Jun 15 17:01:03 2012] Warning, spatial fit 20 centroid is now closest to src. 18
[Fri Jun 15 17:01:03 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.097039 pixels away
[Fri Jun 15 17:01:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:03 2012] Assessing source extent using major
[Fri Jun 15 17:01:03 2012] Source does appear to be extended
[Fri Jun 15 17:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:03 2012] Source is confused with source 21
[Fri Jun 15 17:01:31 2012] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:01:31 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Fri Jun 15 17:01:31 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Fri Jun 15 17:01:31 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.83"
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 15 19:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 15 19:00:10 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jun 15 21:03:24 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.489186 pixels away
[Fri Jun 15 21:03:24 2012] Warning, spatial fit 19 centroid is now closest to src. 21
[Fri Jun 15 21:03:24 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 22.033079 pixels away
[Fri Jun 15 21:03:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:24 2012] Assessing source extent using major
[Fri Jun 15 21:03:24 2012] Source does appear to be extended
[Fri Jun 15 21:03:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:03:49 2012] XMMSAS src. selection expression = ellipse(21729.657913, 32924.728333, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing source region out to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src20_src.reg
[Fri Jun 15 21:03:49 2012] Extracting stamp from image fullrun_pn_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (213, 342) - (288, 417)
[Fri Jun 15 21:03:49 2012] XMMSAS bgd. selection expression = annulus(21729.657913, 32924.728333, 1087.500000, 2175.000000, X, Y) && !ellipse(20379.525833, 36126.742402, 1797.960052, 491.144448, 65.769055, X, Y) && !ellipse(20672.530121, 35537.282471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.672394, 34901.933960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21043.932000, 34528.222000, 708.483220, 708.483220, 0.000000, X, Y) && !ellipse(20156.444200, 36596.970000, 1512.256044, 1512.256044, 0.000000, X, Y) && !ellipse(21248.998000, 34128.672000, 1416.968041, 1416.968041, 0.000000, X, Y) && !ellipse(21906.318000, 32536.366000, 1318.584038, 1318.584038, 0.000000, X, Y) && !ellipse(22187.352000, 31697.964000, 1446.072042, 1446.072042, 0.000000, X, Y) && !ellipse(22457.747925, 31182.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23499.353088, 35243.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22849.438000, 30099.670000, 1255.664036, 1255.664036, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src20.gif
[Fri Jun 15 21:21:55 2012] Mean detx,y = (121.34, 9539.03) 
[Fri Jun 15 21:21:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:22:16 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:22:16 2012] Setting source spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun 15 21:22:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Jun 15 22:39:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 22:39:04 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:14 2012] Error reading totcts from fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Jun 16 00:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:15 2012] Using photon index=1.80, rate=0.0174, arf fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src20.arf
[Sat Jun 16 00:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:15 2012] Updating source flux to 7.5e-14
[Sat Jun 16 00:29:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting