[Fri Jun 15 11:38:20 2012] Detection parameters:
  Position = (242.5, 398.1) = 13 31 3.02 24 22 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.7 +/- 23.6
  Background counts = 44.6
  Rate = 0.01 +/- 0.0009

[Fri Jun 15 11:38:21 2012] Off-axis axis estimate = 8.28'
[Fri Jun 15 11:41:32 2012] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:41:32 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Fri Jun 15 11:41:32 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.874
[Fri Jun 15 11:41:32 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.57"
[Fri Jun 15 14:30:13 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jun 15 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src12.csv
[Fri Jun 15 14:30:13 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jun 15 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src12.csv
[Fri Jun 15 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jun 15 14:30:15 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jun 15 17:01:03 2012] Warning, spatial fit 12 centroid is now closest to src. 45
[Fri Jun 15 17:01:03 2012] Spatial fit model total counts = 1206.180000, observed total counts = 1204.000000
[Fri Jun 15 17:01:03 2012] Offset between fit and detection position for source 12 = 0.626498 pixels
[Fri Jun 15 17:01:03 2012] Warning, changing simple spatial fit ID from 12 to 19
[Fri Jun 15 17:01:03 2012] 1220.590000 total counts/ 971.456000 bgd. counts: snr = 7.993214
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.626498 pixels
  Position = (242.4, 397.4) = 13 31 3.03 24 22 44.8
  Extent = 8.9 (6.9-13.0)", rotation angle = 0
  Source counts = 249.1 +/- 34.9
  Background counts = 971.5
  Rate = 0.009 +/- 0.001
[Fri Jun 15 17:01:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:03 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:03 2012] Source does appear to be extended
[Fri Jun 15 17:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:03 2012] Source is confused with source 19
[Fri Jun 15 17:01:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:01:31 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Fri Jun 15 17:01:31 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.972
[Fri Jun 15 17:01:31 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.86"
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 19:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 15 19:00:10 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun 15 21:03:24 2012] Warning, spatial fit 12 centroid is now closest to src. 19
[Fri Jun 15 21:03:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:24 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:24 2012] Source does appear to be extended
[Fri Jun 15 21:03:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:03:49 2012] XMMSAS src. selection expression = ellipse(21043.932000, 34528.222000, 531.362415, 531.362415, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing source region out to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src12_src.reg
[Fri Jun 15 21:03:49 2012] Extracting stamp from image fullrun_pn_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (212, 367) - (273, 428)
[Fri Jun 15 21:03:49 2012] XMMSAS bgd. selection expression = annulus(21043.932000, 34528.222000, 885.604025, 1771.208051, X, Y) && !ellipse(20379.525833, 36126.742402, 1797.960052, 491.144448, 65.769055, X, Y) && !ellipse(20672.530121, 35537.282471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.672394, 34901.933960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20156.444200, 36596.970000, 1512.256044, 1512.256044, 0.000000, X, Y) && !ellipse(21248.998000, 34128.672000, 1416.968041, 1416.968041, 0.000000, X, Y) && !ellipse(21729.657913, 32924.728333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.318000, 32536.366000, 1318.584038, 1318.584038, 0.000000, X, Y) && !ellipse(22187.352000, 31697.964000, 1446.072042, 1446.072042, 0.000000, X, Y) && !ellipse(23499.353088, 35243.710571, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src12.gif
[Fri Jun 15 21:17:25 2012] Mean detx,y = (123.94, 11288.05) 
[Fri Jun 15 21:17:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:17:37 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:17:38 2012] Setting source spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 15 21:17:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 16 00:28:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:14 2012] Error reading totcts from fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 16 00:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:15 2012] Using photon index=1.80, rate=0.00909, arf fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src12.arf
[Sat Jun 16 00:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:15 2012] Updating source flux to 4.6e-14
[Sat Jun 16 00:29:34 2012] Flag c found in src. 12 procflags, skipping spectral fitting