[Fri Jun 15 11:38:19 2012] Detection parameters:
  Position = (293.1, 276.1) = 13 30 46.91 24 13 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131302.3 +/- 424.9
  Background counts = 60.4
  Rate = 5 +/- 0.02

[Fri Jun 15 11:38:21 2012] Off-axis axis estimate = 1.66'
[Fri Jun 15 11:41:32 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:41:32 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 15 11:41:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Fri Jun 15 11:41:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Jun 15 14:30:13 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 14:30:13 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 14:30:15 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 14:30:15 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 17:01:03 2012] Spatial fit model total counts = 117453.000000, observed total counts = 117269.000000
[Fri Jun 15 17:01:03 2012] Offset between fit and detection position for source 1 = 0.108938 pixels
[Fri Jun 15 17:01:03 2012] 117484.000000 total counts/ 22857.200000 bgd. counts: snr = 625.896668
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.108938 pixels
  Position = (293.0, 276.2) = 13 30 46.92 24 13 57.6
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 94626.8 +/- 342.8
  Background counts = 22857.2
  Rate = 3 +/- 0.01
[Fri Jun 15 17:01:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:03 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:03 2012] Source does appear to be extended
[Fri Jun 15 17:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 17:01:31 2012] Initial guess for spatial extent in simple fitting = 5.99"
[Fri Jun 15 17:01:31 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.134
[Fri Jun 15 17:01:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.99"
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 19:00:09 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 19:00:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 19:00:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 19:00:10 2012] fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 19:00:10 2012] Fit fullrun_pn_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 21:03:24 2012] Spatial fit model total counts = 117453.000000, observed total counts = 117269.000000
[Fri Jun 15 21:03:24 2012] Offset between fit and detection position for source 1 = 0.000063 pixels
[Fri Jun 15 21:03:24 2012] 117484.200000 total counts/ 22865.600000 bgd. counts: snr = 625.727464
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000063 pixels
  Position = (293.0, 276.2) = 13 30 46.92 24 13 57.6
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 94618.6 +/- 342.8
  Background counts = 22865.6
  Rate = 3 +/- 0.01
[Fri Jun 15 21:03:24 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:24 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:24 2012] Source does appear to be extended
[Fri Jun 15 21:03:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:03:49 2012] Counts = 94618.600000, rescaling region sizes by 3.000000
[Fri Jun 15 21:03:49 2012] XMMSAS src. selection expression = ellipse(25444.093890, 23982.541600, 1078.767031, 1078.767031, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing source region out to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 21:03:49 2012] Extracting stamp from image fullrun_pn_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (231, 214) - (355, 338)
[Fri Jun 15 21:03:49 2012] XMMSAS bgd. selection expression = annulus(25444.093890, 23982.541600, 5393.835155, 10787.670310, X, Y) && !ellipse(23593.046200, 24424.103120, 485.957614, 485.957614, 0.000000, X, Y) && !ellipse(30991.450165, 25687.495483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16261.517548, 34929.899384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31740.760800, 27795.550000, 432.739212, 432.739212, 0.000000, X, Y) && !ellipse(20379.525833, 36126.742402, 1797.960052, 491.144448, 65.769055, X, Y) && !ellipse(16601.717072, 35423.466675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20672.530121, 35537.282471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.672394, 34901.933960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21043.932000, 34528.222000, 708.483220, 708.483220, 0.000000, X, Y) && !ellipse(33920.515656, 19400.583908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30551.031250, 34735.476898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33250.783000, 34500.273000, 417.989525, 417.989525, 0.000000, X, Y) && !ellipse(21248.998000, 34128.672000, 1416.968041, 1416.968041, 0.000000, X, Y) && !ellipse(21729.657913, 32924.728333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21906.318000, 32536.366000, 1318.584038, 1318.584038, 0.000000, X, Y) && !ellipse(14348.148117, 32425.054474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30888.886383, 32201.068237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22187.352000, 31697.964000, 1446.072042, 1446.072042, 0.000000, X, Y) && !ellipse(22457.747925, 31182.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35708.786743, 30774.467896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34938.759216, 30480.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.666000, 29182.584000, 1002.400029, 1002.400029, 0.000000, X, Y) && !ellipse(30911.254800, 28647.954100, 358.719210, 358.719210, 0.000000, X, Y) && !ellipse(23555.109200, 28525.440000, 1266.776036, 382.238411, 66.834000, X, Y) && !ellipse(23823.363000, 27850.999200, 1213.336035, 339.792010, 248.327000, X, Y) && !ellipse(24339.150000, 26626.150000, 1118.016032, 1118.016032, 0.000000, X, Y) && !ellipse(16894.292007, 24104.296204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31123.755585, 23970.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20127.240204, 23322.002441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34892.774109, 22855.330597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15670.227417, 22840.084935, 533.015964, 367.007004, 87.670344, X, Y) && !ellipse(27025.537323, 20861.584137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27811.412720, 13788.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23499.353088, 35243.710571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15152.027267, 35093.961609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.295258, 30510.180969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22849.438000, 30099.670000, 1255.664036, 1255.664036, 0.000000, X, Y) && !ellipse(23080.272644, 29624.234863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.926636, 29437.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26976.727264, 29360.733826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23580.570600, 28436.136000, 1213.336035, 387.789611, 247.485000, X, Y) && !ellipse(28751.861267, 27692.908142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.472687, 27616.350372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17857.332540, 27452.239200, 390.369611, 390.369611, 0.000000, X, Y) && !ellipse(23447.627808, 26339.278625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24758.862600, 25579.490000, 1118.016032, 1118.016032, 0.000000, X, Y) && !ellipse(29770.726105, 25431.763062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33638.753326, 21971.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22746.097382, 21336.299393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19660.261703, 20992.300522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24285.416992, 20249.756531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21319.173126, 13173.584396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29460.005371, 18619.467651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17914.460464, 17787.409348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23281.385803, 17183.927826, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 21:03:49 2012] Writing fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 21:04:17 2012] Mean detx,y = (121.32, -125.25) 
[Fri Jun 15 21:04:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 21:08:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 21:08:09 2012] Setting source spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 21:08:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 00:28:14 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:14 2012] Error reading totcts from fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 00:28:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:15 2012] Using photon index=1.80, rate=3.45, arf fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 00:28:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:15 2012] Updating source flux to 8.2e-12
[Sat Jun 16 00:31:52 2012] Reading fit data from xmm0100240101/analysis//spectral/fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 00:31:52 2012] Spectral fit parameter nH value = 8.50301e+20
[Sat Jun 16 00:31:52 2012] Spectral fit parameter PhoIndex value = 2.0067
[Sat Jun 16 00:31:52 2012] Failed to get F(0.3-8.0) from xmm0100240101/analysis//spectral/fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 00:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:31:52 2012] Using Nh = 8.5e+20, photon index=2.01, rate=3.45, arf fullrun_pn_xmm0100240101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 00:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:31:52 2012] Updating source flux to 8.6e-12