[Fri Jun 15 11:39:20 2012] Detection parameters:
  Position = (194.4, 278.0) = 13 31 18.28 24 14 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.4 +/- 15.0
  Background counts = 10.1
  Rate = 0.007 +/- 0.0007

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 7.69'
[Fri Jun 15 15:34:34 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:34 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Fri Jun 15 15:34:34 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Fri Jun 15 15:34:34 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.27"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src6.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src6.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 15 17:00:46 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 15 17:01:17 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.769175 pixels away
[Fri Jun 15 17:01:17 2012] Source 5 is offset by 8.423805 and 3.988321 pixels which is larger than
2 X fitted extent = 1.251370 x 1.251370, not incorporating fit results
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Fri Jun 15 19:52:00 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.27"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 15 21:03:36 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.168645 pixels away
[Fri Jun 15 21:03:36 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 57.170376 pixels away
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(16865.615036, 24137.369904, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (157, 240) - (232, 315)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(16865.615036, 24137.369904, 1087.500000, 2175.000000, X, Y) && !ellipse(15669.229630, 22832.385834, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src5.gif
[Fri Jun 15 23:53:41 2012] Mean detx,y = (-7898.35, -3356.47) 
[Fri Jun 15 23:53:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:54:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:54:01 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 15 23:54:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 16 00:16:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 00:16:30 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 16 00:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:18 2012] Using photon index=1.80, rate=0.00655, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src5.arf
[Sat Jun 16 00:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:18 2012] Updating source flux to 9.6e-14
[Sat Jun 16 00:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting