[Fri Jun 15 11:39:20 2012] Detection parameters:
  Position = (365.7, 320.8) = 13 30 23.80 24 17 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.5 +/- 21.4
  Background counts = 10.5
  Rate = 0.01 +/- 0.001

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 5.14'
[Fri Jun 15 15:34:34 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:34 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Fri Jun 15 15:34:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Fri Jun 15 15:34:34 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.00"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src4.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src4.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 15 17:00:46 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jun 15 17:01:17 2012] Spatial fit model total counts = 472.191000, observed total counts = 436.000000
[Fri Jun 15 17:01:17 2012] Offset between fit and detection position for source 4 = 0.226699 pixels
[Fri Jun 15 17:01:17 2012] 472.517000 total counts/ 245.773000 bgd. counts: snr = 14.463344
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.226699 pixels
  Position = (365.6, 320.6) = 13 30 23.83 24 17 10.4
  Extent = 6.6 (6.0-7.4)", rotation angle = 0
  Source counts = 226.7 +/- 21.7
  Background counts = 245.8
  Rate = 0.008 +/- 0.0007
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Fri Jun 15 19:52:00 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.993
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.56"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src4.csv
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src4.csv
[Fri Jun 15 21:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun 15 21:03:36 2012] Spatial fit model total counts = 468.703000, observed total counts = 436.000000
[Fri Jun 15 21:03:36 2012] Offset between fit and detection position for source 4 = 0.046795 pixels
[Fri Jun 15 21:03:36 2012] 464.587000 total counts/ 234.235000 bgd. counts: snr = 15.051026
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.046795 pixels
  Position = (365.6, 320.6) = 13 30 23.82 24 17 10.5
  Extent = 6.7 (5.6-8.0)", rotation angle = 0
  Source counts = 230.4 +/- 21.6
  Background counts = 234.2
  Rate = 0.008 +/- 0.0007
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(31761.505200, 27843.369000, 399.504611, 399.504611, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (343, 298) - (389, 344)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(31761.505200, 27843.369000, 665.841019, 1331.682038, X, Y) && !ellipse(30937.669891, 28699.368683, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src4.gif
[Fri Jun 15 23:53:12 2012] Mean detx,y = (7328.00, -1214.48) 
[Fri Jun 15 23:53:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:53:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:53:27 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 15 23:53:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00772, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src4.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:18 2012] Updating source flux to 1.3e-13