[Fri Jun 15 11:39:21 2012] Detection parameters:
  Position = (356.2, 330.4) = 13 30 26.83 24 17 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.9 +/- 9.8
  Background counts = 10.1
  Rate = 0.004 +/- 0.0006

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 4.79'
[Fri Jun 15 15:34:35 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:35 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Fri Jun 15 15:34:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.548
[Fri Jun 15 15:34:35 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.82"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jun 15 17:00:46 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src19 appears to have run properly
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:01:17 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 15.053143 pixels away
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Fri Jun 15 19:52:00 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.548
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 8.82"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src19.csv
[Fri Jun 15 21:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:09 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 15 21:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 15 21:03:09 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 15 21:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 15 21:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:36 2012] Source 28 is offset by -5.247909 and -5.975509 pixels which is larger than
2 X fitted extent = 0.676349 x 0.676349, not incorporating fit results
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(30937.669891, 28699.368683, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src28_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (319, 293) - (394, 368)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(30937.669891, 28699.368683, 1087.500000, 2175.000000, X, Y) && !ellipse(31761.505200, 27843.369000, 532.672815, 532.672815, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src28.gif
[Fri Jun 15 23:57:03 2012] Mean detx,y = (6958.82, -2259.26) 
[Fri Jun 15 23:57:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:57:22 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:57:22 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun 15 23:57:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun 16 00:21:15 2012] Not generating rmf since there are only 57 counts
[Sat Jun 16 00:21:15 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun 16 00:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:18 2012] Using photon index=1.80, rate=0.00353, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src28.arf
[Sat Jun 16 00:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:18 2012] Updating source flux to 9.1e-14
[Sat Jun 16 00:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting