[Fri Jun 15 11:39:20 2012] Detection parameters:
  Position = (274.9, 280.9) = 13 30 52.68 24 14 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 565.6 +/- 46.2
  Background counts = 16.9
  Rate = 0.02 +/- 0.002

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 2.13'
[Fri Jun 15 15:34:34 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:34 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Fri Jun 15 15:34:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Fri Jun 15 15:34:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.49"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 17:00:46 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 17:01:17 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.610766 pixels away
[Fri Jun 15 17:01:17 2012] Source 2 is offset by 3.323993 and -0.325216 pixels which is larger than
2 X fitted extent = 3.180428 x 3.180428, not incorporating fit results
[Fri Jun 15 17:01:17 2012] Spatial fit model total counts = 2632.380000, observed total counts = 2202.000000
[Fri Jun 15 17:01:17 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Fri Jun 15 19:52:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.49"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 21:03:36 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Fri Jun 15 21:03:36 2012] Source 2 is offset by 3.334637 and -0.326012 pixels which is larger than
2 X fitted extent = 3.151347 x 3.151347, not incorporating fit results
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(23869.639404, 24388.705597, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (237, 243) - (312, 318)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(23869.639404, 24388.705597, 1087.500000, 2175.000000, X, Y) && !ellipse(25438.119280, 23989.912000, 1399.168840, 1399.168840, 0.000000, X, Y) && !ellipse(23079.085846, 24539.216553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24912.760590, 23261.648315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24440.138824, 23858.732544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.346924, 22465.150146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23445.222351, 26383.107849, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src2.gif
[Fri Jun 15 23:53:02 2012] Mean detx,y = (-1293.07, -993.94) 
[Fri Jun 15 23:53:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:53:09 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:53:09 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 15 23:53:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 16 00:09:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 00:09:23 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.0198, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src2.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 1.9e-13
[Sat Jun 16 00:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting