[Fri Jun 15 11:39:21 2012] Detection parameters:
  Position = (174.4, 403.6) = 13 31 24.69 24 23 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 9.7
  Background counts = 9.6
  Rate = 0.002 +/- 0.0003

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 11.79'
[Fri Jun 15 15:34:35 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:35 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Fri Jun 15 15:34:35 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.103
[Fri Jun 15 15:34:35 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 12.32"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src43.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src43.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src43.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:47 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Jun 15 17:00:47 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Jun 15 17:00:47 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Jun 15 17:01:17 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.210084 pixels away
[Fri Jun 15 17:01:18 2012] Spatial fit model total counts = 153.035000, observed total counts = 152.000000
[Fri Jun 15 17:01:18 2012] Offset between fit and detection position for source 19 = 0.152259 pixels
[Fri Jun 15 17:01:18 2012] 151.509400 total counts/ 116.427000 bgd. counts: snr = 3.251340
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.152259 pixels
  Position = (174.5, 403.4) = 13 31 24.68 24 23 10.5
  Extent = 6.0 (3.3-10.5)", rotation angle = 0
  Source counts = 35.1 +/- 12.3
  Background counts = 116.4
  Rate = 0.001 +/- 0.0004
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:18 2012] Deleting source due to low Poisson probability 0.9