[Fri Jun 15 11:39:21 2012] Detection parameters:
  Position = (192.3, 407.9) = 13 31 19.00 24 23 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.7 +/- 12.5
  Background counts = 9.8
  Rate = 0.003 +/- 0.0004

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 11.06'
[Fri Jun 15 15:34:35 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:35 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Fri Jun 15 15:34:35 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.995
[Fri Jun 15 15:34:35 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.96"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src27.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src27.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:47 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 15 17:00:47 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 15 17:00:47 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jun 15 17:01:17 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.786799 pixels away
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Fri Jun 15 19:52:00 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.995
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.96"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 15 21:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:09 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 15 21:03:09 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 15 21:03:09 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jun 15 21:03:36 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 37.841630 pixels away
[Fri Jun 15 21:03:36 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 55.489117 pixels away
[Fri Jun 15 21:03:36 2012] Spatial fit model total counts = 370.377000, observed total counts = 364.000000
[Fri Jun 15 21:03:36 2012] Offset between fit and detection position for source 15 = 8.743904 pixels
[Fri Jun 15 21:03:36 2012] 287.968120 total counts/ 7.355120 bgd. counts: snr = 103.469632
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 8.743904 pixels
  Position = (199.1, 413.5) = 13 31 16.84 24 23 54.3
  Extent = 23.9 (23.9-47.8)", rotation angle = 0
  Source counts = 280.6 +/- 17.0
  Background counts = 7.4
  Rate = 0.009 +/- 0.0006
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:03:36 2012] Source is confused with source 8
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(17271.208000, 35921.734000, 1434.852041, 1434.852041, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src15_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (117, 331) - (282, 496)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(17271.208000, 35921.734000, 2391.420069, 4782.840138, X, Y) && !ellipse(16265.212088, 34928.132600, 480.769614, 411.191212, -0.000000, X, Y) && !ellipse(19188.695600, 34851.017000, 783.286423, 783.286423, 0.000000, X, Y) && !ellipse(14355.228359, 32453.128660, 626.822067, 339.232691, 324.498914, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src15.gif
[Fri Jun 15 23:57:59 2012] Mean detx,y = (-3430.66, -13997.04) 
[Fri Jun 15 23:58:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:58:43 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:58:43 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri Jun 15 23:58:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 16 00:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:18 2012] Using photon index=1.80, rate=0.00941, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src15.arf
[Sat Jun 16 00:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:18 2012] Updating source flux to 1.8e-13
[Sat Jun 16 00:28:52 2012] Flag c found in src. 15 procflags, skipping spectral fitting