[Fri Jun 15 11:39:21 2012] Detection parameters:
  Position = (311.0, 240.2) = 13 30 41.22 24 11 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.9 +/- 15.4
  Background counts = 14.6
  Rate = 0.005 +/- 0.0006

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 4.32'
[Fri Jun 15 15:34:34 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:34 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Fri Jun 15 15:34:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.021
[Fri Jun 15 15:34:34 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.59"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src11.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src11.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jun 15 17:00:46 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Jun 15 17:01:17 2012] Source 14 is offset by -3.925024 and 7.107718 pixels which is larger than
2 X fitted extent = 0.987062 x 0.987062, not incorporating fit results
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Fri Jun 15 19:52:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.021
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.59"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src11.csv
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src11.csv
[Fri Jun 15 21:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jun 15 21:03:36 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.706286 pixels away
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(27004.344879, 20849.875458, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src14_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (273, 203) - (348, 278)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(27004.344879, 20849.875458, 1087.500000, 2175.000000, X, Y) && !ellipse(25438.119280, 23989.912000, 1399.168840, 1399.168840, 0.000000, X, Y) && !ellipse(24912.760590, 23261.648315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24440.138824, 23858.732544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.346924, 22465.150146, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src14.gif
[Fri Jun 15 23:55:00 2012] Mean detx,y = (260.96, 3431.28) 
[Fri Jun 15 23:55:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:55:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:55:10 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jun 15 23:55:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun 16 00:20:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 16 00:20:27 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun 16 00:28:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:18 2012] Using photon index=1.80, rate=0.00537, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src14.arf
[Sat Jun 16 00:28:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:18 2012] Updating source flux to 6.8e-14
[Sat Jun 16 00:28:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting