[Fri Jun 15 11:39:20 2012] Detection parameters:
  Position = (292.9, 276.2) = 13 30 46.97 24 13 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42148.6 +/- 242.9
  Background counts = 18.0
  Rate = 1 +/- 0.008

[Fri Jun 15 11:39:21 2012] Off-axis axis estimate = 1.66'
[Fri Jun 15 15:34:34 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 15:34:34 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 15 15:34:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Fri Jun 15 15:34:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 17:00:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 17:00:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 17:00:46 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 17:00:46 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 17:01:17 2012] Spatial fit model total counts = 38705.500000, observed total counts = 37759.000000
[Fri Jun 15 17:01:17 2012] Offset between fit and detection position for source 1 = 0.160983 pixels
[Fri Jun 15 17:01:17 2012] 38624.640000 total counts/ 8537.340000 bgd. counts: snr = 325.628139
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.160983 pixels
  Position = (292.9, 276.3) = 13 30 46.95 24 13 57.9
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 30087.3 +/- 196.5
  Background counts = 8537.3
  Rate = 1 +/- 0.007
[Fri Jun 15 17:01:18 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:18 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:18 2012] Source does appear to be extended
[Fri Jun 15 17:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:52:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:52:00 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Fri Jun 15 19:52:00 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.178
[Fri Jun 15 19:52:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 21:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 21:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 21:03:08 2012] fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 21:03:08 2012] Fit fullrun_mos2_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 21:03:36 2012] Spatial fit model total counts = 38774.400000, observed total counts = 37759.000000
[Fri Jun 15 21:03:36 2012] Offset between fit and detection position for source 1 = 0.001716 pixels
[Fri Jun 15 21:03:36 2012] 38690.320000 total counts/ 8601.720000 bgd. counts: snr = 324.421277
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001716 pixels
  Position = (292.9, 276.3) = 13 30 46.95 24 13 57.9
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 30088.6 +/- 196.7
  Background counts = 8601.7
  Rate = 1 +/- 0.007
[Fri Jun 15 21:03:36 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:36 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:36 2012] Source does appear to be extended
[Fri Jun 15 21:03:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:49:33 2012] Counts = 30088.600000, rescaling region sizes by 3.000000
[Fri Jun 15 23:49:33 2012] XMMSAS src. selection expression = ellipse(25438.119280, 23989.912000, 1049.376630, 1049.376630, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing source region out to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 23:49:33 2012] Extracting stamp from image fullrun_mos2_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (233, 216) - (353, 337)
[Fri Jun 15 23:49:33 2012] XMMSAS bgd. selection expression = annulus(25438.119280, 23989.912000, 5246.883151, 10493.766302, X, Y) && !ellipse(30978.628600, 25664.623200, 395.231211, 395.231211, 0.000000, X, Y) && !ellipse(23869.639404, 24388.705597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31761.505200, 27843.369000, 532.672815, 532.672815, 0.000000, X, Y) && !ellipse(16265.212088, 34928.132600, 480.769614, 411.191212, -0.000000, X, Y) && !ellipse(16865.615036, 24137.369904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.149800, 13791.330600, 335.191210, 335.191210, 0.000000, X, Y) && !ellipse(23079.085846, 24539.216553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33994.689400, 19504.561600, 366.316811, 366.316811, 0.000000, X, Y) && !ellipse(30828.233600, 32221.277760, 597.673617, 597.673617, 0.000000, X, Y) && !ellipse(27004.344879, 20849.875458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31134.063029, 23958.189220, 580.244982, 301.639227, 314.070445, X, Y) && !ellipse(19188.695600, 34851.017000, 783.286423, 783.286423, 0.000000, X, Y) && !ellipse(15669.229630, 22832.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20121.513960, 23333.558800, 377.896811, 377.896811, 0.000000, X, Y) && !ellipse(24912.760590, 23261.648315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17853.108000, 27438.469200, 289.206408, 289.206408, 0.000000, X, Y) && !ellipse(34894.160034, 22904.976990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30937.669891, 28699.368683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24440.138824, 23858.732544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23273.148960, 17168.916200, 318.353609, 318.353609, 0.000000, X, Y) && !ellipse(30460.799000, 34656.822620, 332.577284, 332.577284, 0.000000, X, Y) && !ellipse(17271.208000, 35921.734000, 1913.136055, 1913.136055, 0.000000, X, Y) && !ellipse(34890.597000, 30508.568600, 419.586412, 419.586412, 0.000000, X, Y) && !ellipse(25196.346924, 22465.150146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.955279, 30509.710959, 599.771604, 279.023724, 356.793338, X, Y) && !ellipse(19621.554031, 21026.746872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14355.228359, 32453.128660, 626.822067, 339.232691, 324.498914, X, Y) && !ellipse(35682.650635, 30835.953064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33640.773804, 22007.845245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23445.222351, 26383.107849, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:49:33 2012] Writing fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 23:49:39 2012] Mean detx,y = (33.00, -26.08) 
[Fri Jun 15 23:49:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:52:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:52:45 2012] Setting source spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 23:52:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 00:28:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:17 2012] Error reading totcts from fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=1.01, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 1e-11
[Sat Jun 16 00:29:34 2012] Reading fit data from xmm0100240101/analysis//spectral/fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 00:29:34 2012] Spectral fit parameter nH value = 8.53538e+20
[Sat Jun 16 00:29:34 2012] Spectral fit parameter PhoIndex value = 1.97084
[Sat Jun 16 00:29:34 2012] Failed to get F(0.3-8.0) from xmm0100240101/analysis//spectral/fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 00:29:34 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:29:34 2012] Using Nh = 8.5e+20, photon index=1.97, rate=1.01, arf fullrun_mos2_xmm0100240101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 00:29:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:29:34 2012] Updating source flux to 1e-11