[Fri Jun 15 11:38:50 2012] Detection parameters:
  Position = (191.2, 407.7) = 13 31 19.33 24 23 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.5 +/- 13.8
  Background counts = 9.8
  Rate = 0.004 +/- 0.0005

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 11.10'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Fri Jun 15 14:30:16 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.992
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.98"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src19.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src19.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jun 15 15:34:34 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Jun 15 17:01:10 2012] Source 8 is offset by -7.233027 and -5.749842 pixels which is larger than
2 X fitted extent = 1.371568 x 1.371568, not incorporating fit results
[Fri Jun 15 17:01:10 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.503785 pixels away
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:10 2012] Source is confused with source 6
[Fri Jun 15 19:00:11 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Fri Jun 15 19:00:11 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.992
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.98"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:30 2012] Source 8 is offset by -7.233027 and -5.749842 pixels which is larger than
2 X fitted extent = 1.371568 x 1.371568, not incorporating fit results
[Fri Jun 15 21:03:30 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.489715 pixels away
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(16589.336670, 35423.373749, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (154, 370) - (229, 445)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(16589.336670, 35423.373749, 1087.500000, 2175.000000, X, Y) && !ellipse(16243.046509, 34912.227509, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src8.gif
[Fri Jun 15 23:27:18 2012] Mean detx,y = (-13595.43, 3801.65) 
[Fri Jun 15 23:27:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:27:27 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:27:27 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 15 23:27:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun 15 23:48:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 23:48:26 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00357, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src8.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 8.3e-14
[Sat Jun 16 00:28:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting