[Fri Jun 15 11:38:50 2012] Detection parameters:
  Position = (365.4, 320.1) = 13 30 23.89 24 17 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.0 +/- 21.1
  Background counts = 11.6
  Rate = 0.01 +/- 0.001

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 5.10'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Fri Jun 15 14:30:16 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.98"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src4.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src4.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:01:10 2012] Warning, spatial fit 4 centroid is now closest to src. 18
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 8.98"
[Fri Jun 15 19:00:11 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.98"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun 15 21:03:30 2012] Spatial fit model total counts = 460.922000, observed total counts = 443.000000
[Fri Jun 15 21:03:30 2012] Offset between fit and detection position for source 4 = 0.224439 pixels
[Fri Jun 15 21:03:30 2012] 465.970000 total counts/ 213.489000 bgd. counts: snr = 17.279889
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.224439 pixels
  Position = (365.3, 320.3) = 13 30 23.93 24 17 9.2
  Extent = 7.7 (6.8-8.7)", rotation angle = 0
  Source counts = 252.5 +/- 21.6
  Background counts = 213.5
  Rate = 0.008 +/- 0.0007
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(31732.227200, 27816.807800, 464.349013, 464.349013, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (339, 294) - (392, 347)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(31732.227200, 27816.807800, 773.915022, 1547.830045, X, Y) && !ellipse(30987.796844, 25634.469238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30936.435303, 28673.386566, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src4.gif
[Fri Jun 15 23:23:35 2012] Mean detx,y = (-955.69, -7481.20) 
[Fri Jun 15 23:23:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:23:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:23:49 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 15 23:23:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00847, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src4.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 1.4e-13