[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (245.8, 151.7) = 13 31 1.91 24 4 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.2 +/- 9.5
  Background counts = 9.7
  Rate = 0.003 +/- 0.0006

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 11.30'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 12.08"
[Fri Jun 15 14:30:16 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.978
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.08"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 15 15:34:34 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Jun 15 17:01:10 2012] Spatial fit model total counts = 152.033000, observed total counts = 153.000000
[Fri Jun 15 17:01:10 2012] Offset between fit and detection position for source 39 = 0.202102 pixels
[Fri Jun 15 17:01:10 2012] 152.609800 total counts/ 126.096000 bgd. counts: snr = 2.361138
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.202102 pixels
  Position = (246.0, 151.8) = 13 31 1.85 24 4 56.2
  Extent = 4.4 (3.0-7.6)", rotation angle = 0
  Source counts = 26.5 +/- 12.4
  Background counts = 126.1
  Rate = 0.0009 +/- 0.0004
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 17:01:10 2012] Deleting source due to low Poisson probability 0.9