[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (281.2, 307.2) = 13 30 50.70 24 16 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.4 +/- 11.9
  Background counts = 13.4
  Rate = 0.002 +/- 0.0004

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 1.40'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Fri Jun 15 14:30:16 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.874
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.13"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src29.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src29.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src29.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Jun 15 15:34:34 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Jun 15 17:01:10 2012] Spatial fit model total counts = 244.499000, observed total counts = 245.000000
[Fri Jun 15 17:01:10 2012] Offset between fit and detection position for source 36 = 0.393903 pixels
[Fri Jun 15 17:01:10 2012] 243.615400 total counts/ 195.277000 bgd. counts: snr = 3.459129
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.393903 pixels
  Position = (280.8, 307.3) = 13 30 50.82 24 16 12.6
  Extent = 6.4 (4.4-8.5)", rotation angle = 0
  Source counts = 48.3 +/- 15.6
  Background counts = 195.3
  Rate = 0.002 +/- 0.0005
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 6.43"
[Fri Jun 15 19:00:11 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.021
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 6.43"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src27.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src27.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jun 15 21:03:30 2012] Warning, spatial fit 27 centroid is now closest to src. 37
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(24378.561000, 26684.390800, 386.007011, 386.007011, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src36_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (259, 285) - (303, 329)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(24378.561000, 26684.390800, 643.345019, 1286.690037, X, Y) && !ellipse(25435.961000, 23985.280800, 1442.020841, 1442.020841, 0.000000, X, Y) && !ellipse(23461.399445, 26320.305786, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src36.gif
[Fri Jun 15 23:28:56 2012] Mean detx,y = (-2691.08, -240.82) 
[Fri Jun 15 23:28:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:29:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:29:06 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Fri Jun 15 23:29:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Jun 15 23:49:03 2012] Not generating rmf since there are only 48 counts
[Fri Jun 15 23:49:03 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00162, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src36.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 1.9e-14
[Sat Jun 16 00:28:20 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting