[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (301.9, 338.4) = 13 30 44.08 24 18 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.5 +/- 11.1
  Background counts = 11.7
  Rate = 0.003 +/- 0.0005

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 2.91'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Fri Jun 15 14:30:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.88"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src21.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jun 15 15:34:34 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Jun 15 17:01:10 2012] Warning, spatial fit 21 centroid is now closest to src. 32
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Fri Jun 15 19:00:11 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 7.88"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src21.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src21.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src21_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src21.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Jun 15 21:03:30 2012] Source 33 is offset by -7.299097 and -0.318956 pixels which is larger than
2 X fitted extent = 1.533508 x 1.533508, not incorporating fit results
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(26221.108582, 29392.442841, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src33_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (264, 301) - (339, 376)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(26221.108582, 29392.442841, 1087.500000, 2175.000000, X, Y) && !ellipse(28709.045600, 27660.955200, 478.417614, 478.417614, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src33.gif
[Fri Jun 15 23:27:45 2012] Mean detx,y = (-4514.06, -3034.23) 
[Fri Jun 15 23:27:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:28:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:28:03 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun 15 23:28:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun 15 23:48:38 2012] Not generating rmf since there are only 69 counts
[Fri Jun 15 23:48:38 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00301, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src33.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 3.9e-14
[Sat Jun 16 00:28:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting