[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (272.5, 405.3) = 13 30 53.46 24 23 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 8.5
  Background counts = 10.0
  Rate = 0.001 +/- 0.0003

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 7.97'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Fri Jun 15 14:30:16 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.836
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.41"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src42.ximg exists
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Jun 15 15:34:33 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src42 appears to have run properly
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Jun 15 15:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Jun 15 15:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Fri Jun 15 15:34:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 17:01:10 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.679656 pixels away
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Fri Jun 15 19:00:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.836
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 10.41"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src33.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src33.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src33.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:52:00 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Jun 15 19:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Jun 15 19:52:00 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Jun 15 19:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Jun 15 19:52:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:24 2012] Warning, spatial fit 14 centroid is now closest to src. 42
[Fri Jun 15 21:03:24 2012] Warning, spatial fit 18 centroid is now closest to src. 20
[Fri Jun 15 21:03:24 2012] Warning, spatial fit 20 centroid is now closest to src. 44
[Fri Jun 15 21:03:24 2012] Warning, spatial fit 52 centroid is now closest to src. 51
[Fri Jun 15 21:03:30 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.565885 pixels away
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(23659.501801, 35211.183807, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src30_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (235, 368) - (310, 443)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(23659.501801, 35211.183807, 1087.500000, 2175.000000, X, Y) && !ellipse(21942.951019, 34463.864746, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src30.gif
[Fri Jun 15 23:30:11 2012] Mean detx,y = (-10890.95, -2733.22) 
[Fri Jun 15 23:30:12 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:30:19 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:30:19 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Jun 15 23:30:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Jun 15 23:49:27 2012] Not generating rmf since there are only 41 counts
[Fri Jun 15 23:49:27 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.0014, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src30.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 2.9e-14
[Sat Jun 16 00:28:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting