[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (223.4, 122.8) = 13 31 9.04 24 2 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 11.9
  Background counts = 9.5
  Rate = 0.003 +/- 0.0004

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 13.85'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Fri Jun 15 14:30:16 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 13.35"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src28.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src28.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src28.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Jun 15 15:34:34 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Jun 15 17:01:10 2012] Spatial fit model total counts = 177.511000, observed total counts = 177.000000
[Fri Jun 15 17:01:10 2012] Offset between fit and detection position for source 28 = 0.558513 pixels
[Fri Jun 15 17:01:10 2012] 180.506300 total counts/ 124.460000 bgd. counts: snr = 5.023797
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.558513 pixels
  Position = (223.9, 122.7) = 13 31 8.86 24 2 49.5
  Extent = 6.4 (4.8-8.4)", rotation angle = 0
  Source counts = 56.0 +/- 13.4
  Background counts = 124.5
  Rate = 0.002 +/- 0.0005
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 6.43"
[Fri Jun 15 19:00:11 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.022
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 6.43"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src26 appears to have run properly
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri Jun 15 21:03:30 2012] Spatial fit model total counts = 157.000000, observed total counts = 157.000000
[Fri Jun 15 21:03:30 2012] Offset between fit and detection position for source 28 = 0.094830 pixels
[Fri Jun 15 21:03:30 2012] 158.839100 total counts/ 100.117000 bgd. counts: snr = 5.868778
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.094830 pixels
  Position = (224.0, 122.6) = 13 31 8.83 24 2 49.4
  Extent = 6.8 (4.9-8.6)", rotation angle = 0
  Source counts = 58.7 +/- 12.6
  Background counts = 100.1
  Rate = 0.002 +/- 0.0004
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(19440.765410, 10621.206800, 407.518053, 407.518053, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src28_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (201, 99) - (247, 146)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(19440.765410, 10621.206800, 679.196754, 1358.393508, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src28.gif
[Fri Jun 15 23:28:44 2012] Mean detx,y = (10263.27, 10430.26) 
[Fri Jun 15 23:28:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:28:54 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:28:54 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jun 15 23:28:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Jun 15 23:48:58 2012] Not generating rmf since there are only 58 counts
[Fri Jun 15 23:48:58 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00197, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src28.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 4.9e-14
[Sat Jun 16 00:28:20 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting