[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (311.1, 241.0) = 13 30 41.17 24 11 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.5 +/- 14.7
  Background counts = 14.0
  Rate = 0.005 +/- 0.0006

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 4.27'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Fri Jun 15 14:30:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.657
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.56"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src8.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src8.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 15 15:34:33 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun 15 17:01:10 2012] Spatial fit model total counts = 241.721000, observed total counts = 235.000000
[Fri Jun 15 17:01:10 2012] Offset between fit and detection position for source 26 = 0.578047 pixels
[Fri Jun 15 17:01:10 2012] 233.726300 total counts/ 169.504000 bgd. counts: snr = 4.932827
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.578047 pixels
  Position = (311.1, 240.4) = 13 30 41.16 24 11 21.7
  Extent = 3.3 (2.5-4.4)", rotation angle = 0
  Source counts = 64.2 +/- 15.3
  Background counts = 169.5
  Rate = 0.002 +/- 0.0005
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 3.27"
[Fri Jun 15 19:00:11 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.639
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 3.27"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src8.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src8.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:03:30 2012] Warning, spatial fit 8 centroid is now closest to src. 40
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(27019.974460, 20865.862800, 196.115406, 196.115406, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src26_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (300, 229) - (322, 252)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(27019.974460, 20865.862800, 326.859009, 653.718019, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src26.gif
[Fri Jun 15 23:24:52 2012] Mean detx,y = (3695.85, -460.93) 
[Fri Jun 15 23:24:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:25:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:25:01 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 15 23:25:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Jun 15 23:47:38 2012] Not generating rmf since there are only 64 counts
[Fri Jun 15 23:47:38 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00216, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src26.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 3.6e-14
[Sat Jun 16 00:28:20 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting