[Fri Jun 15 11:38:51 2012] Detection parameters:
  Position = (402.2, 351.0) = 13 30 12.17 24 19 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 10.2
  Background counts = 9.8
  Rate = 0.002 +/- 0.0003

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 8.44'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Fri Jun 15 14:30:16 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 10.65"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src35.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src35.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src35.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Jun 15 15:34:34 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Jun 15 15:34:34 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Jun 15 17:01:10 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.351074 pixels away
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Fri Jun 15 19:00:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.65"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src29.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src29.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src29.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Jun 15 21:03:30 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.005980 pixels away
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:43 2012] XMMSAS src. selection expression = ellipse(34945.707428, 30491.173615, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src16_src.reg
[Fri Jun 15 23:18:43 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (365, 314) - (440, 389)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(34945.707428, 30491.173615, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src16.gif
[Fri Jun 15 23:29:24 2012] Mean detx,y = (-2190.01, -11449.71) 
[Fri Jun 15 23:29:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:29:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:29:35 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jun 15 23:29:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jun 15 23:49:10 2012] Not generating rmf since there are only 57 counts
[Fri Jun 15 23:49:10 2012] rmf not generated due to insufficient counts
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jun 16 00:28:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:17 2012] Using photon index=1.80, rate=0.00192, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src16.arf
[Sat Jun 16 00:28:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:17 2012] Updating source flux to 4.3e-14
[Sat Jun 16 00:28:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting