[Fri Jun 15 11:38:50 2012] Detection parameters:
  Position = (292.9, 276.1) = 13 30 46.96 24 13 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42300.1 +/- 246.9
  Background counts = 15.1
  Rate = 1 +/- 0.008

[Fri Jun 15 11:38:51 2012] Off-axis axis estimate = 1.67'
[Fri Jun 15 14:30:16 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 14:30:16 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Fri Jun 15 14:30:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Fri Jun 15 14:30:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 15:34:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 15:34:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 15:34:33 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 15:34:33 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 17:01:10 2012] Spatial fit model total counts = 37483.000000, observed total counts = 37483.000000
[Fri Jun 15 17:01:10 2012] Offset between fit and detection position for source 1 = 0.120820 pixels
[Fri Jun 15 17:01:10 2012] 37519.180000 total counts/ 7633.880000 bgd. counts: snr = 342.046346
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.120820 pixels
  Position = (292.9, 276.3) = 13 30 46.95 24 13 57.7
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 29885.3 +/- 193.7
  Background counts = 7633.9
  Rate = 1 +/- 0.006
[Fri Jun 15 17:01:10 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 17:01:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 17:01:10 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 17:01:10 2012] Source does appear to be extended
[Fri Jun 15 17:01:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 19:00:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 19:00:11 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Fri Jun 15 19:00:11 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.131
[Fri Jun 15 19:00:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 19:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 19:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 19:51:59 2012] fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 19:51:59 2012] Fit fullrun_mos1_xmm0100240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 21:03:30 2012] Spatial fit model total counts = 37482.900000, observed total counts = 37483.000000
[Fri Jun 15 21:03:30 2012] Offset between fit and detection position for source 1 = 0.000012 pixels
[Fri Jun 15 21:03:30 2012] 37519.070000 total counts/ 7625.870000 bgd. counts: snr = 342.316402
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000012 pixels
  Position = (292.9, 276.3) = 13 30 46.95 24 13 57.7
  Extent = 6.0 (5.9-6.1)", rotation angle = 0
  Source counts = 29893.2 +/- 193.7
  Background counts = 7625.9
  Rate = 1 +/- 0.006
[Fri Jun 15 21:03:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 21:03:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 21:03:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 21:03:30 2012] Source does appear to be extended
[Fri Jun 15 21:03:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:18:42 2012] Counts = 29893.200000, rescaling region sizes by 3.000000
[Fri Jun 15 23:18:42 2012] XMMSAS src. selection expression = ellipse(25435.961000, 23985.280800, 1081.515631, 1081.515631, 0.000000, X, Y)
[Fri Jun 15 23:18:42 2012] Writing source region out to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 23:18:42 2012] Extracting stamp from image fullrun_mos1_xmm0100240101_pi300-10000_cl_sm2.00.img.gz, (231, 214) - (355, 338)
[Fri Jun 15 23:18:43 2012] XMMSAS bgd. selection expression = annulus(25435.961000, 23985.280800, 5407.578156, 10815.156311, X, Y) && !ellipse(30987.796844, 25634.469238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23588.340000, 24442.136000, 376.215211, 376.215211, 0.000000, X, Y) && !ellipse(31732.227200, 27816.807800, 619.132018, 619.132018, 0.000000, X, Y) && !ellipse(33964.990051, 19529.309021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16243.046509, 34912.227509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27829.729767, 13782.547226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.974460, 20865.862800, 261.487208, 261.487208, 0.000000, X, Y) && !ellipse(31126.599800, 23979.607000, 512.820815, 512.820815, 0.000000, X, Y) && !ellipse(15688.008652, 22840.682800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16877.516205, 24134.815765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21942.951019, 34463.864746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30936.435303, 28673.386566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23047.639679, 24493.855377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20146.880958, 23347.372315, 474.001118, 261.082288, 345.493921, X, Y) && !ellipse(17885.217972, 27451.961578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16589.336670, 35423.373749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17928.094040, 17716.116501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26221.108582, 29392.442841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19201.033600, 34872.148400, 411.169612, 411.169612, 0.000000, X, Y) && !ellipse(28709.045600, 27660.955200, 478.417614, 478.417614, 0.000000, X, Y) && !ellipse(30528.315400, 34704.019800, 307.924009, 307.924009, 0.000000, X, Y) && !ellipse(24378.561000, 26684.390800, 514.676015, 514.676015, 0.000000, X, Y) && !ellipse(28806.350600, 22895.807200, 1081.576031, 379.626411, 328.131380, X, Y) && !ellipse(34945.707428, 30491.173615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23461.399445, 26320.305786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14297.094519, 32402.133864, 472.556550, 270.928286, 325.870364, X, Y) && !ellipse(23659.501801, 35211.183807, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 23:18:43 2012] Writing fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 23:18:48 2012] Mean detx,y = (196.63, -189.39) 
[Fri Jun 15 23:18:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 23:22:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 23:22:55 2012] Setting source spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 23:22:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 00:28:16 2012] Updating aperture counts using extracted products
[Sat Jun 16 00:28:16 2012] Error reading totcts from fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 00:28:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:16 2012] Using photon index=1.80, rate=1, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 00:28:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:16 2012] Updating source flux to 9.2e-12
[Sat Jun 16 00:28:52 2012] Reading fit data from xmm0100240101/analysis//spectral/fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 00:28:52 2012] Spectral fit parameter nH value = 8.41588e+20
[Sat Jun 16 00:28:52 2012] Spectral fit parameter PhoIndex value = 1.98532
[Sat Jun 16 00:28:52 2012] Failed to get F(0.3-8.0) from xmm0100240101/analysis//spectral/fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 00:28:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 00:28:52 2012] Using Nh = 8.4e+20, photon index=1.99, rate=1, arf fullrun_mos1_xmm0100240101_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 00:28:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 00:28:52 2012] Updating source flux to 9.1e-12