[Wed May 23 10:17:08 2012] Detection parameters:
  Position = (335.0, 428.5) = 2 14 22.61 -73 49 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.1 +/- 7.8
  Background counts = 5.9
  Rate = 0.003 +/- 0.0008

[Wed May 23 10:17:09 2012] Off-axis axis estimate = 9.80'
[Wed May 23 10:19:32 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Wed May 23 10:19:32 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Wed May 23 10:19:32 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.090
[Wed May 23 10:19:32 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.33"
[Wed May 23 11:02:31 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 23 11:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_src3.csv
[Wed May 23 11:02:31 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 23 11:02:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_src3.csv
[Wed May 23 11:02:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:02:31 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 23 11:02:31 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 23 11:02:31 2012] Fit fullrun_pn_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 23 12:17:51 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.425924 pixels away
[Wed May 23 12:17:51 2012] Vigneting correction estimate = 1.000000
[Wed May 23 12:17:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 12:17:51 2012] Assessing source extent using major
[Wed May 23 12:17:51 2012] Source does appear to be extended
[Wed May 23 12:17:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 12:18:12 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Wed May 23 12:18:12 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Wed May 23 12:18:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.090
[Wed May 23 12:18:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.33"
[Wed May 23 12:59:59 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 23 12:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_src3.csv
[Wed May 23 12:59:59 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 23 12:59:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_src3.csv
[Wed May 23 12:59:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:00:00 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 23 13:00:00 2012] fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 23 13:00:00 2012] Fit fullrun_pn_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed May 23 14:01:34 2012] Spatial fit model total counts = 92.859600, observed total counts = 93.000000
[Wed May 23 14:01:34 2012] Offset between fit and detection position for source 4 = 0.162817 pixels
[Wed May 23 14:01:34 2012] 93.194800 total counts/ 71.449200 bgd. counts: snr = 2.572603
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.162817 pixels
  Position = (334.9, 428.6) = 2 14 22.77 -73 49 38.2
  Extent = 5.9 (3.9-8.9)", rotation angle = 0
  Source counts = 21.7 +/- 9.7
  Background counts = 71.4
  Rate = 0.002 +/- 0.001
[Wed May 23 14:01:34 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:01:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:01:34 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:01:34 2012] Source does appear to be extended
[Wed May 23 14:01:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:01:55 2012] XMMSAS src. selection expression = ellipse(29086.916420, 37239.765000, 356.083244, 356.083244, 0.000000, X, Y)
[Wed May 23 14:01:55 2012] Writing source region out to fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4_src.reg
[Wed May 23 14:01:55 2012] Extracting stamp from image fullrun_pn_xmm0099840101_pi300-10000_cl_sm2.00.img.gz, (314, 408) - (355, 449)
[Wed May 23 14:01:55 2012] XMMSAS bgd. selection expression = annulus(29086.916420, 37239.765000, 593.472073, 1186.944146, X, Y)
[Wed May 23 14:01:55 2012] Writing fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4.gif
[Wed May 23 14:04:39 2012] Mean detx,y = (599.66, 13119.86) 
[Wed May 23 14:04:43 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:05:03 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:05:03 2012] Setting source spectrum file to fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 14:05:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 23 14:18:10 2012] Not generating rmf since there are only 21 counts
[Wed May 23 14:18:10 2012] rmf not generated due to insufficient counts
[Wed May 23 14:55:36 2012] Updating aperture counts using extracted products
[Wed May 23 14:55:36 2012] Error reading totcts from fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 14:55:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 14:55:38 2012] Using photon index=1.80, rate=0.00233, arf fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4.arf
[Wed May 23 14:55:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 14:55:38 2012] Updating source flux to 1.5e-14
[Wed May 23 14:56:07 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 23 14:56:08 2012] xmm0099840101/analysis//spectral/fullrun_pn_xmm0099840101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete