[Wed May 23 10:18:12 2012] Detection parameters:
  Position = (215.5, 364.8) = 2 16 27.51 -73 54 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.7 +/- 9.9
  Background counts = 4.6
  Rate = 0.007 +/- 0.001

[Wed May 23 10:18:13 2012] Off-axis axis estimate = 7.70'
[Wed May 23 11:43:36 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Wed May 23 11:43:36 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Wed May 23 11:43:36 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.915
[Wed May 23 11:43:36 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.28"
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 23 12:17:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src4.csv
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 23 12:17:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src4.csv
[Wed May 23 12:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 23 12:17:44 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed May 23 12:18:01 2012] Spatial fit model total counts = 79.996900, observed total counts = 80.000000
[Wed May 23 12:18:01 2012] Offset between fit and detection position for source 6 = 0.302636 pixels
[Wed May 23 12:18:01 2012] 79.947000 total counts/ 41.036200 bgd. counts: snr = 6.074165
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.302636 pixels
  Position = (215.2, 364.7) = 2 16 27.82 -73 54 15.1
  Extent = 4.6 (2.9-6.2)", rotation angle = 0
  Source counts = 38.9 +/- 8.9
  Background counts = 41.0
  Rate = 0.003 +/- 0.0007
[Wed May 23 12:18:01 2012] Vigneting correction estimate = 1.000000
[Wed May 23 12:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 12:18:01 2012] Assessing source extent using major axis lower bound
[Wed May 23 12:18:01 2012] Source does appear to be extended
[Wed May 23 12:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:31:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 13:31:51 2012] Initial guess for spatial extent in simple fitting = 4.56"
[Wed May 23 13:31:51 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.938
[Wed May 23 13:31:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.56"
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src4.csv
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src4.csv
[Wed May 23 14:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 23 14:01:26 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed May 23 14:01:42 2012] Spatial fit model total counts = 79.998400, observed total counts = 80.000000
[Wed May 23 14:01:42 2012] Offset between fit and detection position for source 6 = 0.004891 pixels
[Wed May 23 14:01:42 2012] 79.946900 total counts/ 41.029300 bgd. counts: snr = 6.075737
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.004891 pixels
  Position = (215.2, 364.7) = 2 16 27.82 -73 54 15.1
  Extent = 4.6 (2.9-6.2)", rotation angle = 0
  Source counts = 38.9 +/- 8.9
  Background counts = 41.0
  Rate = 0.003 +/- 0.0007
[Wed May 23 14:01:42 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:01:42 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:01:42 2012] Source does appear to be extended
[Wed May 23 14:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:41:17 2012] XMMSAS src. selection expression = ellipse(18671.312940, 31682.747600, 274.042208, 274.042208, 0.000000, X, Y)
[Wed May 23 14:41:17 2012] Writing source region out to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src6_src.reg
[Wed May 23 14:41:17 2012] Extracting stamp from image fullrun_mos2_xmm0099840101_pi300-10000_cl_sm2.00.img.gz, (199, 349) - (231, 380)
[Wed May 23 14:41:17 2012] XMMSAS bgd. selection expression = annulus(18671.312940, 31682.747600, 456.737013, 913.474026, X, Y)
[Wed May 23 14:41:17 2012] Writing fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src6.gif
[Wed May 23 14:42:38 2012] Mean detx,y = (-7795.73, -3912.09) 
[Wed May 23 14:42:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:42:52 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:42:53 2012] Setting source spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 23 14:42:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 23 14:54:01 2012] Not generating rmf since there are only 38 counts
[Wed May 23 14:54:01 2012] rmf not generated due to insufficient counts
[Wed May 23 14:55:41 2012] Updating aperture counts using extracted products
[Wed May 23 14:55:41 2012] Error reading totcts from fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 23 14:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 14:55:42 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src6.arf
[Wed May 23 14:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 14:55:42 2012] Updating source flux to 6e-14
[Wed May 23 14:55:58 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting