[Wed May 23 10:18:12 2012] Detection parameters:
  Position = (369.2, 369.6) = 2 13 46.69 -73 53 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.7 +/- 7.6
  Background counts = 4.5
  Rate = 0.004 +/- 0.001

[Wed May 23 10:18:13 2012] Off-axis axis estimate = 7.28'
[Wed May 23 11:43:36 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed May 23 11:43:36 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed May 23 11:43:36 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Wed May 23 11:43:36 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.07"
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 23 12:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src7.csv
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 23 12:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src7.csv
[Wed May 23 12:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 23 12:17:44 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May 23 12:18:01 2012] Spatial fit model total counts = 52.999500, observed total counts = 53.000000
[Wed May 23 12:18:01 2012] Offset between fit and detection position for source 5 = 0.227179 pixels
[Wed May 23 12:18:01 2012] 52.986800 total counts/ 33.260300 bgd. counts: snr = 3.420479
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.227179 pixels
  Position = (369.0, 369.7) = 2 13 46.92 -73 53 53.7
  Extent = 3.6 (2.6-5.6)", rotation angle = 0
  Source counts = 19.7 +/- 7.3
  Background counts = 33.3
  Rate = 0.002 +/- 0.0006
[Wed May 23 12:18:01 2012] Vigneting correction estimate = 1.000000
[Wed May 23 12:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 12:18:01 2012] Assessing source extent using major axis lower bound
[Wed May 23 12:18:01 2012] Source does appear to be extended
[Wed May 23 12:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:31:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 13:31:51 2012] Initial guess for spatial extent in simple fitting = 3.60"
[Wed May 23 13:31:51 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.851
[Wed May 23 13:31:51 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 3.60"
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src7.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src7.csv
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src7.csv
[Wed May 23 14:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May 23 14:01:26 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed May 23 14:01:42 2012] Spatial fit model total counts = 54.986300, observed total counts = 55.000000
[Wed May 23 14:01:42 2012] Offset between fit and detection position for source 5 = 0.019299 pixels
[Wed May 23 14:01:42 2012] 54.733900 total counts/ 35.257700 bgd. counts: snr = 3.280026
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.019299 pixels
  Position = (369.0, 369.7) = 2 13 46.93 -73 53 53.6
  Extent = 3.6 (2.6-5.4)", rotation angle = 0
  Source counts = 19.5 +/- 7.4
  Background counts = 35.3
  Rate = 0.002 +/- 0.0006
[Wed May 23 14:01:42 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:01:42 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:01:42 2012] Source does appear to be extended
[Wed May 23 14:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:41:17 2012] XMMSAS src. selection expression = ellipse(32055.350646, 32118.938200, 217.484779, 217.484779, 0.000000, X, Y)
[Wed May 23 14:41:17 2012] Writing source region out to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src5_src.reg
[Wed May 23 14:41:17 2012] Extracting stamp from image fullrun_mos2_xmm0099840101_pi300-10000_cl_sm2.00.img.gz, (357, 357) - (382, 382)
[Wed May 23 14:41:17 2012] XMMSAS bgd. selection expression = annulus(32055.350646, 32118.938200, 362.474632, 724.949264, X, Y)
[Wed May 23 14:41:17 2012] Writing fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src5.gif
[Wed May 23 14:43:35 2012] Mean detx,y = (4245.90, -9809.10) 
[Wed May 23 14:43:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:43:45 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:43:46 2012] Setting source spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 23 14:43:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed May 23 14:54:27 2012] Not generating rmf since there are only 19 counts
[Wed May 23 14:54:27 2012] rmf not generated due to insufficient counts
[Wed May 23 14:55:41 2012] Updating aperture counts using extracted products
[Wed May 23 14:55:41 2012] Error reading totcts from fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed May 23 14:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 14:55:42 2012] Using photon index=1.80, rate=0.0016, arf fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src5.arf
[Wed May 23 14:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 14:55:42 2012] Updating source flux to 4.4e-14
[Wed May 23 14:55:58 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting