[Wed May 23 10:18:12 2012] Detection parameters:
  Position = (297.6, 387.9) = 2 15 1.60 -73 52 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.6 +/- 6.4
  Background counts = 4.4
  Rate = 0.002 +/- 0.0007

[Wed May 23 10:18:13 2012] Off-axis axis estimate = 6.49'
[Wed May 23 11:43:36 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Wed May 23 11:43:36 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Wed May 23 11:43:36 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.809
[Wed May 23 11:43:36 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.67"
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src12.ximg exists
[Wed May 23 12:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src12.csv
[Wed May 23 12:17:44 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May 23 12:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src12.csv
[Wed May 23 12:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 12:17:45 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May 23 12:17:45 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May 23 12:17:45 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed May 23 12:18:01 2012] Spatial fit model total counts = 39.723300, observed total counts = 42.000000
[Wed May 23 12:18:01 2012] Offset between fit and detection position for source 4 = 0.579162 pixels
[Wed May 23 12:18:01 2012] 40.557700 total counts/ 26.821300 bgd. counts: snr = 2.652363
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.579162 pixels
  Position = (297.0, 388.1) = 2 15 2.19 -73 52 34.7
  Extent = 5.0 (2.4-7.2)", rotation angle = 0
  Source counts = 13.7 +/- 6.4
  Background counts = 26.8
  Rate = 0.001 +/- 0.0005
[Wed May 23 12:18:01 2012] Vigneting correction estimate = 1.000000
[Wed May 23 12:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 12:18:01 2012] Assessing source extent using major axis lower bound
[Wed May 23 12:18:01 2012] Source does appear to be extended
[Wed May 23 12:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:31:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 13:31:51 2012] Initial guess for spatial extent in simple fitting = 5.04"
[Wed May 23 13:31:51 2012] source mask rpix=1.2, npix_max = 11, mask sum = 13, frac = 1.181
[Wed May 23 13:31:51 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 5.04"
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src12.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src12.csv
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed May 23 14:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src12.csv
[Wed May 23 14:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed May 23 14:01:26 2012] fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed May 23 14:01:26 2012] Fit fullrun_mos2_xmm0099840101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed May 23 14:01:42 2012] Spatial fit model total counts = 39.704300, observed total counts = 42.000000
[Wed May 23 14:01:42 2012] Offset between fit and detection position for source 4 = 0.004420 pixels
[Wed May 23 14:01:42 2012] 40.544700 total counts/ 26.974000 bgd. counts: snr = 2.612941
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.004420 pixels
  Position = (297.0, 388.1) = 2 15 2.18 -73 52 34.7
  Extent = 4.9 (2.5-7.7)", rotation angle = 0
  Source counts = 13.6 +/- 6.4
  Background counts = 27.0
  Rate = 0.001 +/- 0.0005
[Wed May 23 14:01:42 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:01:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:01:42 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:01:42 2012] Source does appear to be extended
[Wed May 23 14:01:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:41:17 2012] XMMSAS src. selection expression = ellipse(25793.527060, 33712.919600, 293.269808, 293.269808, 0.000000, X, Y)
[Wed May 23 14:41:17 2012] Writing source region out to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src4_src.reg
[Wed May 23 14:41:17 2012] Extracting stamp from image fullrun_mos2_xmm0099840101_pi300-10000_cl_sm2.00.img.gz, (280, 371) - (314, 405)
[Wed May 23 14:41:17 2012] XMMSAS bgd. selection expression = annulus(25793.527060, 33712.919600, 488.783014, 977.566028, X, Y)
[Wed May 23 14:41:17 2012] Writing fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src4.gif
[Wed May 23 14:45:08 2012] Mean detx,y = (-2123.47, -8700.71) 
[Wed May 23 14:45:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:45:25 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:45:25 2012] Setting source spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 14:45:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 23 14:54:59 2012] Not generating rmf since there are only 13 counts
[Wed May 23 14:54:59 2012] rmf not generated due to insufficient counts
[Wed May 23 14:55:41 2012] Updating aperture counts using extracted products
[Wed May 23 14:55:42 2012] Error reading totcts from fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 23 14:55:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 14:55:42 2012] Using photon index=1.80, rate=0.00111, arf fullrun_mos2_xmm0099840101_pi300-10000_pass1_cl_src4.arf
[Wed May 23 14:55:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 14:55:42 2012] Updating source flux to 2.2e-14
[Wed May 23 14:55:58 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting